background image

 

www.bkte.pl

 

 

AL200 swinghandle manual 

 

1

 

Introduction

 

1.1

 

General information 

 

Warning: 
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take 
adequate measures. 

 
The specification is owned and copyrighted by BKT Elektronik Sp. z o.o. Information contained herein may be changed at owner’s discretion 
without any notice. BKT Elektronik may not be held liable for any possible inaccuracies and discrepancies in this document. 
 

1.2

 

Device characteristics 

The AL200 is an electronic swinghandle for ICT cabinets. It allows opening of cabinet doors in a standard mechanical way and by electrical remote 
control. It can operate with any access control system. Together with optional card reader it can also work as a stand-alone access control system. 
Thanks to the installed cylinder, it is also possible to open it in an emergency with a key. 
 
Basic features: 

 

Possibility to work autonomously or in the access control system. 

 

Two connectors providing control and status signals of the handle and for the optional fid card reader. 

 

Equipped with the optical sensor of the handle position. 

 

Three-color LED signalling the operation status of the swinghandle. 

 

Emergency key override. 

 

Available inserts for the master key system. 

 

For use with indoor cabinets. 

 

Installation in a standard 150x25mm cut out. 

 

Can be installed in a single and multi-point locking system (requires additional elements - cam or cogwheel mechanism, which should 
be ordered separately). 

  

1.3

 

Working modes 

In the current version (manufacturing date from Q2 2022, see chapte6 Accessories), the handle can work in one of three modes: 

1. Standard mechanical handle 

 

If the electronic opening functionality is not used, the handle works as a standard mechanical handle 
opened with a key. This solution is used when the cabinet is to be equipped with access control at a 
later time. 

2. Stand-alone access control system 

 

Any card reader or keyboard with Wiegand interface can be connected directly to the handle. The 
handle together with an optional reader creates an autonomous access control system. It is possible 
to assign 63 identifiers (cards or PIN codes) of users who will be able to open the handle. Read more 
in chapte4 Standalone mode. 

3. Work in the access control system 

 

In  this  mode,  the  handle  works  only  as  an  electronic  mechanism  that  opens  the  cabinet.  It  is 
compatible with any access control system. The external access controller controls the opening of 
the handle. Information about the status of the handle (tilted/not tilted) can be transferred to the 
superior controller. Read more in chapte5 Operation mode in the access control system. 

Summary of Contents for AL200
















Reviews: