Black & Decker A7073, Manual

5

•

Do not overreach. Keep proper 

footing and balance at all times. 

This enables better control of the 

power tool in unpredictable 

situations. 

•

Use personal protective 

equipment. Always wear eye 

protection. The glasses for daily 

use only have the anti-fall lens. 

They are not the protection 

glasses. Protective equipment 

such as dust mask, non-skid 

safety shoes, hard hat, or hearing 

protection must be used for 

appropriate conditions.

POWER TOOL USE AND 

CARE

•

Fix the tools with clamping fixture 

or other effective method on a 

solid platform. It is unreliable to 

control the tools with hands or 

body. 

•

Do not force the power tool. Use 

the correct power tool for your 

application. The correct power 

tool will do the job better and 

safer at the rate for which it was 

designed.

•

Do not use the power tool if the 

switch does not turn it on and off. 

Any power tool that cannot be 

controlled with the switch is 

dangerous and must be repaired.

•

Disconnect the plug from the 

power source and/or the battery 

pack from the power tool before 

making any adjustments, 

changing accessories, or storing

power tools. Such preventive 

safety measures reduce the risk 

of starting the power tool 

accidentally.

•

Store idle power tools out of the 

reach of children and do not 

allow persons unfamiliar with the 

power tool or these instructions 

to operate the power tool. Power 

tools are dangerous in the hands 

of untrained users.

•

Keep the battery components far

away from the metal objects 

(e.g., clips, coins, keys, nails, 

screws or other metal items) 

when they are not in use, 

because such objects may cause 

the conduction of the two 

terminals of the battery. Sparks, 

combustion or fire may be caused 

if the two terminals of the battery 

are conducted. 

•

Keep cutting tools sharp and 

clean. Properly maintained 

cutting tools with sharp cutting 

edges are less likely to bind and 

are easier to control.

•

Maintain power tools. Check for 

misalignment or binding of 

moving parts, breakage of parts 

and any other condition that may 

affect the power tool’s operation. 

If damaged, have the power tool 

repaired before use. Many 

accidents are caused by poorly 

maintained power tools.

•

Use the accessories 

recommended by Black & Decker 

only. Danger may be resulted in if 

the accessory for certain tool is 

used on other tools. 

REPAIR 

•

Have your power tool serviced by 

a qualified repair person. Danger 

may be caused if repair or 

maintenance is carried out by 

unqualified personnel. 

•

Use only identical replacement 

parts when repairing the tools.

Comply with the instructions in 

“maintenance” section of this 

manual. Using unauthorized parts 

or failing to comply with the 

maintenance instruction may 

result in the equipment damage 

or personal injury. 

ADDITIONAL POWER 

TOOL SAFETY 

WARNINGS

Hold power tool by insulated 

gripping surfaces when performing an

 operation where the cutting 

accessory may contact hidden wiring. 

Cutting accessory contacting a "live" 

wire may make exposed metal parts 

of the power tool "live" and could 

give the operator an electric shock.

ENGLISH