Black & Decker AIRSWIVEL BDASP100 Series Instruction Manual Download

Page: 15 / 16

Vacuum cleaner won’t run: Possible causes Remedies

1. Vacuum cleaner is not plugged in

1. Check electrical plug

2. Blown fuse/tripped breaker

2. Check/replace fuse or reset breaker

Vacuum cleaner won’t pick up dirt:

Possible causes

Remedies

1. Dust cup is full

1. Empty dust cup

2. Filter is dirty

2. Check, remove debris or clean

3. Hose not secure

3. Check to be sure hose is snapped into place at
both ends

4. Dust cup not in place

4. Make sure dust cup is fully inserted and dust cup
release handle is pushed in completely

5. Vacuum path clogged

5. Visually check air passageway, hose inlet, and
hose for anything that might be obstructing the

vacuum path. Carefully remove blockage

Troubleshooting

Replacement Parts

WARNING:

To reduce the risk of electric shock, turn power OFF and

disconnect plug from electrical outlet before performing maintenance or

troubleshooting to the vacuum cleaner.

Other maintenance or service not included in the manual should be performed by an

authorized service representative. Thank you for selecting a BLACK&DECKER product.

Please do not return this product to the store

For any questions or concerns, please contact our Customer Service at

1-800-524-6716

Item

Name

Part No.

Color

2 in 1

Crevice Tool

Hose

Brush Roll

Pet Tool

L0101

Black

Blue

Red

Blue

Red

Cool Grey 4C

L0102

L0301

L0302

L0401

L0402

P0501

P0502

Summary of Contents for AIRSWIVEL BDASP100 Series

















Search results

Summary of Contents for AIRSWIVEL BDASP100 Series

Reviews:

Related manuals for AIRSWIVEL BDASP100 Series

Brands by name

Popular brands

Black & Decker AIRSWIVEL BDASP100 Series, Instruction Manual

Search results

Summary of Contents for AIRSWIVEL BDASP100 Series

Reviews:

Related manuals for AIRSWIVEL BDASP100 Series

Brands by name

Popular brands