background image

3

DO NOT

 use the vacuum cleaner with 

blocked filters. Clean or replace filters

before continuing. (refer to User 

Maintenance section).

DO NOT

 use the vacuum cleaner if the 

appliance malfunctions, abnormal

noise, smell, smoke, is dropped or 

damaged in any manner or any breakage 

is found during operation.

DO NOT

 misuse the cord. Never pull the 

appliance by the cord or pull to

disconnect it from the outlet. Instead, 

grasp the plug and pull to disconnect.

DO NOT

 use the vacuum cleaner to pick 

up large objects, hard or sharp objects 

such as glass, nails, screws, coins, etc. 

that are likely to cause damage.

DO NOT

 Leave Unattended when plugged 

in and / or switched on.

DO NOT

 use vacuum cleaner if it has 

been dropped, damaged, left outdoors,

or dropped into liquid (water etc.)

DO NOT

 close door on cord, or pull cord 

around sharp edges or corners.

DO NOT

 handle the plug or vacuum 

cleaner with wet hands.

DO NOT

 put any objects into openings.

DO NOT

 use with any openings blocked 

and do not restrict airflow.

DO NOT

 operate the appliance with

a damaged cord or plug.

If the supply cord is damaged, it must be 

replaced by the manufacturer, its

service agent or similarly qualified persons 

in order to avoid a hazard.

DO NOT

 use without filters in place.

DO NOT

 attempt to modify this product in 

any way.

DO 

empty the Dust Canister and clean the 

filters regularly for optimal

operation of the vacuum.

DO 

keep hair, loose clothing, fingers, feet 

and body parts away from openings

or moving parts.

DO 

disconnect the appliance from the 

mains supply before connecting the

flexible suction hose.

DO 

turn off controls before you connect or 

disconnect the appliance to or from

the mains supply.

DO disconnect the appliance from the 

power supply when not in use, before

changing the filters, cleaning the filters or 

connecting / disconnecting the

accessories.

DO 

use only on dry, indoor surfaces.

DO 

use only as described in this manual. 

Use only manufacturer’s

recommended attachments.

DO 

Keep cord away from heated surfaces.

DO 

Keep all openings free of dust, lint. 

hair, and anything that may reduce

airflow.

DO 

use extra care when vacuuming on 

stairs.

DO 

keep your work area well lit.

DO 

store your appliance indoors in a cool. 

dry area.

DO 

ensure children and babies cannot 

play with plastic bags or any packaging

materials.

DO 

operate the appliance from a power 

source of the same voltage, frequency

and rating as indicated on the product 

identification plate.

If this appliance is used by a third party, 

DO 

supply the instruction manual with it.

No liability can be accepted for any 

damage caused by non-compliance with

these instructions or any other improper 

use or mishandling of appliance.

This product has not been designed for 

any uses other than those specified in

this manual.

DO NOT 

modify the polarized plug to fit

a non

polarized outlet or extension cord.

Keep appliance on a level surface.
ONLY 

for domestic use.

Industrial or commercial use invalidates 

the warranty.

To reduce the risk of electric shock, this 

appliance has a polarized plug (one blade is 

wider than the other). This plug will fit in a 

polarized outlet only one way. If the plug does 

not fit fully in the outlet, reverse the plug. If it 

still does not fit, contact a qualified electrician 

to install the proper outlet. Do not change the 

plug in any way.

Summary of Contents for AIRSWIVEL BDASP100 Series

















Reviews: