Black & Decker BDAS36V, Original Instructions Manual

6

ENGLISH

(Original instructions)

c. When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, 

nails, screws, or other small metal objects, that can 

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns 

or a fire

d. 

Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help.

Liquid ejected from the 

battery may cause irritation or burns.

e. Do not use a battery pack or tool that is damaged or 

modified. 

Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk

of injury.

f.

Do not expose a battery pack or tool to fire or 

excessive temperature.

Exposure to fire or temperature

above 130 °C may cause explosion. NOTE: The 

temperature „130 °C“ can be replaced by the temperature 

„265 °F“.

g.  Follow all charging instructions and do not charge the 

battery pack or tool outside the temperature range 

specified in the instructions.

Charging improperly or at 

temperatures outside the specified range may damage the

battery and increase the risk of fire

6.

Service

a.

Have your power tool serviced by a qualified repair 

person using only identical replacement parts. 

This 

will ensure that the safety of the power tool is maintained.

b.  Never service damaged battery packs. 

Service of 

battery packs should only be performed by the 

manufacturer or authorized service providers (only used 

for battery tools).

Additional Power Tool Safety Warnings

●

Hold the power tool by insulated gripping surfaces, 

when performing an operation where the cutting tool 

may contact hidden wiring.

 Contact with a “live” wire will 

also make exposed metal parts of the power tool “live” and 

could give the operator an electric shock.

● Use clamps or another practical way to secure and sup-

port the workpiece to a stable platform. Holding the work 

by hand or against your body leaves it unstable and may 

lead to loss of control.

● The intended use is described in this instruction manual. 

The use of any accessory or attachment or performance 

of any operation with this tool other than those recom-

mended in this instruction manual may present a risk of 

personal injury and/or damage to property.

Safety of others

● This appliance can be used by children aged from 8 years 

and above and persons with reduced physical, sensory or 

mental capabilities or lack of experience and knowledge if 

they have been given supervision or instruction concern-

ing use of the appliance in a safe way and understand the 

hazards involved.

● Children shall not play with the appliance. Cleaning and 

user maintenance shall not be made by children without 

supervision.

Residual risks

Additional residual risks may arise when using the tool which 

may not be included in the enclosed safety warnings. These 

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations 

and the implementation of safety devices, certain residual 

risks can not be avoided. These include:

● Injuries caused by touching any rotating/moving parts.

● Injuries caused when changing any parts, blades or 

accessories.

● Injuries caused by prolonged use of a tool. When using 

any tool for prolonged periods ensure you take regular 

breaks.

● Impairment of hearing.

● Health hazards caused by breathing dust developed when 

using your tool (example:- working with wood, especially 

oak, beech and MDF.)

Vibration

The declared vibration emission values stated in the technical 

data and the declaration of conformity have been measured in 

accordance with a standard test method provided by EN62841 

and may be used for comparing one tool with another. The 

declared vibration emission value may also be used in a 

preliminary assessment of exposure.

Warning!

 The vibration emission value during actual use of 

the power tool can differ from the declared value depending 

on the ways in which the tool is used. The vibration level may 

increase above the level stated.

When assessing vibration exposure to determine safety 

measures required by 2002/44/EC to protect persons regularly 

using power tools in employment, an estimation of vibration 

exposure should consider, the actual conditions of use and the 

way the tool is used, including taking account of all parts of the 

operating cycle such as the times when the tool is switched off 

and when it is running idle in addition to the trigger time.

Labels on tool

The following symbols are shown on the tool along with the 

date code: