ENGLISH
8
(Original instructions)
Warning!
Before performing any
maintenance on corded/ cordless power
tools:
• Switch off and unplug the appliance/tool.
• Or switch off and remove the battery
from the appliance/tool if the
appliance/tool has a separate battery
pack.
• Or run the battery down completely if it
is integral and then switch off.
• Unplug the charger before cleaning it.
Your charger does not require any
maintenance apart from regular cleaning.
• Regularly clean the ventilation slots in
your appliance/tool/charger using a soft
brush or dry cloth.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
• Regularly open the chuck and tap it to
remove any dust from the interior (when
fitted).
Replace the carbon brush (Fig. D)
Lubrication
• Regularly replace and inspect the carbon
brush. Once completely worn out by
continuous wear and tear, it will have to
be replaced. Must keep carbon brush
clean and sliding freely within the brush
holder. Both carbon brushes have to be
replaced at the same time.
• Remove the fixed screws (9) on the
carbon brush to remove the carbon
brush (10) and brush holder.
• Remove the coil spring supporting the
carbon brush (11) in the brush holder, and
insert a new carbon brush that meets the
specifications.
• Set up the brush holder again and return
the supporting coil spring to its original
position.
Cleaning
Warning!
Blow dirt and dust out of
the main housing with dry air as
often as dirt is seen collecting in and
around the air vents. Wear approved
eye protection and approved dust
mask when performing this
procedure.
Warning!
Never use solvents or
other harsh chemicals for cleaning
the non-metallic parts of the tool.
These chemicals may weaken the
material of the parts. Use only mild
soap and damp cloth to clean the
tool. Never let any liquid get inside
the tool; never immerse any part of
the tool into liquid.
Service Information
BLACK+DECKER offers a full network of
company-owned and authorized service
locations throughtout Asia. All
BLACK+DECKER Service Centers are staffed
with trained personnel to provide customers
with efficient and reliable product service.
Whether you need technical advice, repair,
or genuine factory replacement parts,
contact the BLACK+DECKER location
nearest to you.
NOTE
• BLACK+DECKER's policy is one of
continuous improvement to our products
and, as such, we reserve the right to
change product specifications without
prior notice.
• Standard equipment and accessories may
vary by country.
• Product specifications may differ by
country.
• Complete product range may not be
available in all countries. Contact your
local BLACK+DECKER dealers for range
availability
Summary of Contents for BDHR202
