Black & Decker BDT20WTB, Instruction Manual

Page 15

SET UP & USE

GENERAL INFORMATION

Recommended humidity levels: 

30%-50% (Too dry, less than 15%, too humid, greater than 50%)

During operation, it is normal for the exhaust coming from the side of the 

dehumidifier to be warm.

Caused by preliminary factory testing, there may also be a small amount of water 

present in the bucket before using the dehumidifier for the first time, which is normal.

Operating temperature: 41˚F-90˚F (5˚C-32˚C)
Operating humidity: 30% RH-90% RH

SPECIFICATIONS

BDT20WTB

Dehumidifying capacity: 20 pints per day 
Bucket capacity:  8 pints 
Air flow volume (high/low): 182/155 CFM 
Power:  115v, 60 Hz, 3.5A 
Power consumption: 260 watts

BDT30WTB

Dehumidifying capacity: 30 pints per day 
Bucket capacity:  8 pints 
Air flow volume (high/low): 182/155 CFM 
Power:  115v, 60 Hz, 4.2A 
Power consumption: 330 watts

BDT40WTB

Dehumidifying capacity: 40 pints per day 
Bucket capacity:  14.3 pints 
Air flow volume (high/low): 182/155 CFM 
Power:  115v, 60 Hz, 5.0A 
Power consumption: 395 watts 

BDT50WTB

Dehumidifying capacity: 50 pints per day 
Bucket capacity:  14.3 pints 
Air flow volume (high/low): 182/155 CFM 
Power:  115v, 60 Hz, 7.0A 
Power consumption: 540 watts

BDT50PWTB

Dehumidifying capacity: 50 pints per day 
Bucket capacity:  14.3 pints 
Air flow volume (high/low): 182/155 CFM 
Power:  115v, 60 Hz, 7.0A 
Power consumption: 540 watts