Page 10
ENGLISH
SET UP & USE
Page 10
POWER
: Turn the FAN on by pressing the
‘POWER’ button; Turn the FAN off by pressing
the ‘POWER’ button again.
SPEED
: You can adjust the fan speed to
the desired level: low, medium, or high by
pressing ’SPEED’. The corresponding LED
light I (Low), II (medium) and III (high)
will illuminate.
MODE
: Pressing the’ MODE’ button will set
the FAN to NORMAL, NATURAL, or SLEEP
mode.
• The default mode is
NORMAL
and
provides a steady air flow.
• NATURAL
mode cycles through low,
medium and high fan speeds for 5
seconds each.
• In
SLEEP
mode the fan will cycle to a
lower fan speed after 30 minutes of
operation when set at either a high or
medium fan speed.
The
NM
(Normal),
NT
(Natural) and
SL
(Sleep)
will illuminate to indicate the selection.
TIMER
: The fan is equipped with a timer
that allows you to set its length of operation
from 1/2 hour to 7 1/2 hours. Continue to
press the
TIMER
button to scroll through
the different time selections of 1/2 hour, 1
hour, 2 hours, and 4 hours. The combination
of selections 1/2H, 1H, 2H and 4H will be
illuminated. The fan will automatically shut-off
after the selected duration.
OSC
: Pressing the ‘OSC’ button will start
and stop the oscillation function.
I
II
III
1/2 H
1 H
NM
NT
SL
2H
4 H
BFTR138 LED DISPLAY
