Page 11
ENGLISH
Page 11
SET UP & USE
POWER
: Turn the FAN on by pressing the
‘POWER’ button; Turn the FAN off by pressing
the ‘POWER’ button again.
TEMPERATURE:
The LED display will
illuminate and show the room temperature.
The temperature display will change to
‘TIMER’ when the timer is set.
SPEED
: You can adjust the fan speed to
the desired level: low, medium, or high by
pressing ’SPEED’. The selected fan speed will
be displayed on the LED display.
MODE
: Pressing the’ MODE’ button will set
the FAN to NORMAL, NATURAL, or SLEEP
mode.
• The default mode is
NORMAL
and
provides a steady air flow.
• NATURAL
mode cycles through low,
medium and high fan speeds for 5
seconds each.
• In
SLEEP
mode the fan will cycle to a
lower fan speed after 30 minutes of
operation when set at either a high or
medium fan speed.
The
(Normal),
(Natural) and
(Sleep) will illuminate to indicate the
selection.
TIMER
: The fan is equipped with a timer
that allows you to set it’s length of operation
from 1 hour to 12 hours. Continue to press
the TIMER button to add time in 1 hour
increments. The time selected will show on the
LED Display. The fan will automatically shut-
off after the selected duration.
OSC
: Pressing the ‘OSC’ button will start
and stop the oscillation function.
POWER SAVE MODE
: When the ‘sleep’ mode
or the ‘timer’ is on, the LED display will turn off
after 30 seconds. Press any key to turn on the
display again.
BFTR146 LED DISPLAY
