38
ENGLISH
5. Using the string trimmer auxiliary and back handles, lift
up the string trimmer and ensure the mower deck is
securely attached.
6. The trimmer should be in the position shown in Fig. D.
Fig. D
7. To remove the string trimmer from the mower deck,
step on the release lever
3
and lift the trimmer out as
shown in Fig. E and F.
3
Fig. E
Fig. F
WARNING:
Depending on the string trimmer and/or
battery pack used with the mower deck, the assembly
may become unbalanced and tip. Care should be
exercised when using on uneven ground or a slope.
String trimmer should be removed from mower deck
when storing or when user leaves its vicinity.
Operating Instructions
Once a string trimmer is attached to the mower deck, switch
trimmer on as directed by your trimmer’s instruction manual.
1. Grip the handle of the string trimmer and move the
mower deck forward slowly in a straight line to ensure
even cutting and coverage of the lawn as shown in
Fig. G. Do not lift up or pivot mower deck. Keep all four
wheels in contact with the ground.
Fig. G
Note:
The deck can either be moved in long lines in a
traditional mowing fashion or moved back and forth in a
vacuuming-like motion.
Note:
Several passes may be required with long grass.
Wheel Adjustment
WARNING:
Before adjusting the height of the mower
deck, ensure your string trimmer is switched off and
disconnected from the power supply. The mower deck
offers two cutting lengths; 40mm and 60mm.
To Adjust The Height of The Mower Deck
1. Grasp the wheel
4
of the mower deck and push it
toward the front of the deck as shown in Fig. H.
4
Fig. H
2. Then, slide the wheel up or down within the U-shaped
groove
5
(Fig. I) under the deck to set the height. Move
the wheel up for shorter-cut grass or down for a longer-cut.
3. Repeat for each wheel until all four wheels are adjusted to
the same height and are fully in the upper or lower slots.
5
3
Fig. I
