6
ENGLISH
◆
Tap the centre of the scale with one foot to activate the
appliance. The red indicator (6) lights up.
◆
Wait for the message (22) to appear on the screen (1).
◆
Re-fit the remote control or place it on a location within
arm’s reach and within transmitting range for remote
interaction with the appliance.
◆
Step on the appliance. The digits on the screen start blinking.
◆
The weight (23) appears on the screen.
◆
The result for body fat percentage (24) appears on the
screen.
◆
The result for body water percentage (25) appears on the
screen.
Athlete mode
People of 15-50 years of age who train intensively for more
than 12 hours a week and who have a resting heart rate of
approximately 60 beats per minute or less, have these
measurements performed more accurately in the athlete mode.
The athlete mode can be selected prior to performing
a measurement.
◆
Wait for the message (21) to appear on the screen (4).
◆
Press and hold the ‘UP’ adjustment button (2) for 1 second.
The athlete mode symbol (26) appears on the screen.
Body fat percentage
Age
Thin
Under
Normal
Over
Obese
weight
weight
Female
6-15
< 8
8-15
15-22
22-29
> 29
16-39
< 13
13-20
20-27
27-34
> 34
40-55
< 14
14-21
21-28
28-35
> 35
56-75
< 15
15-22
22-29
29-36
> 36
Athlete
15-25
Male
6-15
< 8
8-15
15-22
22-29
> 29
16-39
< 10
10-17
17-24
24-31
> 31
40-55
< 11
11-18
18-25
25-32
> 32
56-75
< 12
12-19
19-26
26-33
> 33
Athlete
3-15
Body water percentage
Female
Male
Child
58-70
60-73
Adult
42-61
46-66
Athlete
56-71
60-73
Error indicator (fig. F)
The screen will display an error warning (27) if an error during
measurement has occurred.
Changing the measurement system (fig. D & E)
The measurement system can be changed prior to performing
a measurement.
◆
Wait for the message (21) to appear on the screen (4).
◆
Press and hold the set button (3) for 1 second. The change
of measurement system (11 or 12) appears on the screen.
Overload indicator (fig. F)
The screen will display an overload warning (28) if the weight
exceeds the maximum capacity.
◆
Immediately remove the weight from the appliance to
prevent damage.
Maintenance
Warning!
Before cleaning or maintenance make sure the
appliance is switched off.
◆
Clean the appliance using only mild soap and a damp
cloth. Do not use any abrasive or solvent-based cleaner.
◆
Periodically open the battery compartment and check the
batteries for corrosion.
Warning!
Do not immerse any part of the appliance in water
or any other liquid.
Low battery indicator (fig. F)
The LCD screen will display a low battery warning (29) when
the battery of the remote control is nearly empty. The LCD
screen will display a low battery warning (30) when the
battery of the appliance is nearly empty.
◆
Replace the battery.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
