Black & Decker BPDH5510, User Manual

4

ENGLISH

b.  Do not use the power tool if the switch does not turn 

it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c.  Disconnect the plug from the power source before 

making any adjustments, changing accessories, or 
storing power tools.

 Such preventive safety measures 

reduce the risk of starting the power tool accidentally.

d.  Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 
users.

e.  Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 
other condition that may affect the power tools 
operation. If damaged, have the power tool repaired 
before use.

 Many accidents are caused by poorly 

maintained power tools.

f.  Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are 
less likely to bind and are easier to control. for 
operations different from those intended could result in a 
hazardous situation.

g.  Use the power tool, accessories and tool bits etc., in 

accordance with these instructions and in the 
manner intended for the particular type of power 
tool, taking into account the working conditions and 
the work to be performed. 

Use of the power tool for 

operations different from those intended could result in a 
hazardous situation.

5.  Service

a.  Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This 

will ensure that the safety of the power tool is 
maintained.

6.  Labels on tool

This tool is double insulated; therefore no earth wire 
is required. Always check that the power supply 

corresponds to the voltage on the rating plate.

•  This appliance is not intended for use by young or infirm 

persons without supervision. Children must be 
supervised to ensure they do not play with the appliance.

•  If the supply cord is damaged, it must be replaced by the 

manufacturer, an authorized Black & Decker Service 

Centre or an equally qualified person in order to avoid a 

hazard. If the supply cord is replaced by an equally 

qualified person, but not authorized by Black & Decker, 

the warranty will lose effect.

Additional safety instructions for Hammer 
Drill

•  Wear ear protectors with impact drills.

 Exposure to 

noise can cause hearing loss.

•  Hold power tool by insulated gripping surfaces when 

performing an operation where the cutting tool may 
contact hidden wiring or its own cord.

 Contact with a 

“live” wire will also make exposed metal parts of the 
power tool “live” and shock the operator.

•  Use clamps or another practical way to secure and 

support the workpiece to a stable platform.

 Holding 

the work by hand or against your body leaves it unstable 
and may lead to loss of control.

•  Before drilling into walls, floors or ceilings check for the 

location of wiring and pipes.

•  Avoid touching the tip of a drill bit just after drilling, as it 

may be hot.