Black & Decker BPRS3102 Pro Line, Instruction Manual

4

ENGLISH

c.  Disconnect the plug from the power source before 

making any adjustments, changing accessories, or 
storing power tools. Such preventive safety measures 
reduce the risk of starting the power tool accidentally.

d.  Store idle power tools out of the reach of children and do 

not allow persons unfamiliar with the power tool or these 
instructions to operate the power tool. Power tools are 
dangerous in the hands of untrained users.

e.  Maintain power tools. Check for misalignment or binding 

of moving parts, breakage of parts and any other 
condition that may affect the power tools operation. If 
damaged, have the power tool repaired before use. 
Many accidents are caused by poorly maintained power 
tools.

f.  Keep cutting tools sharp and clean. Properly maintained 

cutting tools with sharp cutting edges are less likely to 
bind and are easier to control.

g.  Use the power tool, accessories and tool bits etc., in 

accordance with these instructions and in the manner 
intended for the particular type of power tool, taking into 
account the working conditions and the work to be 
performed. Use of the power tool for operations different 
from those intended could result in a hazardous 
situation.

5.  Service

a.  Have your power tool serviced by a qualified repair 

person using only identical replacement parts. This will 
ensure that the safety of the power tool is maintained.

6.  Electrical safety

This tool is double insulated; therefore no earth 
wire is required. Always check that the power 

supply corresponds to the voltage on the rating plate.

Warning!

 If the power cord is damaged, it must 

be replaced by the manufacturer, authorized 
Black & Decker Service Center or an equally 

qualified person in order to avoid damage or injury. If the 
power cord is replaced by an equally qualified person, but 
not authorized by Black & Decker, the warranty will not be 
valid.

7.  Labels on tool

The label on your tool may include the following symbols:

Additional safety instructions for sanders

Warning!

 Contact with or inhalation of dusts arising from 

sanding applications may endanger the health of the operator 

and possible bystanders. Wear a dust mask specifically 

designed for protection against dust and fumes and ensure 

that persons within or entering the work area are also 

protected.

•  Thoroughly remove all dust after sanding.

•  Take special care when sanding paint which is possibly 

lead based or when sanding some woods and metal 

which may produce toxic dust:

  - Do not let children or pregnant women enter the work 

   area.

  - Do not eat, drink or smoke in the work area.

  - Dispose of dust particles and any other debris safely.

Features

This tool includes some or all of the following features.

1.  On/off switch

2.  Lock-on button

3.  Dust extraction outlet

4.  Sanding base

5.  Paper clamp lever

6.  Variable speed control knob

Hz .......  Hertz

W ....... 

Watts

min .....  minutes

       .....  Alternating

Current

        .....  Direct 

Current

 Read

Instructions

Manual

 Use Eye

Protection

 Use Ear

Protection

           ......  Class II

Construction

          ......  Earthing

Terminal

         ......  Safety

Alert Symbol

.../min.. 

Revolutions 

or Recipro-

cation per

minute

V ........     Volts

A ........    Amperes 

n

0

 .......    No-Load 

               Speed