TWO YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth
all the responsibilities of Vector Products, Inc., regarding this product. There is no other
warranty, other than those described herein. Any implied warranty of merchantability or
fitness for a particular purpose on this product is limited in duration to the duration of this
warranty.
This Vector Products, Inc. product is warranted, to the original purchaser only, to be free
of defects in materials and workmanship for two years from the date of purchase without
additional charge. The warranty does not extend to subsequent purchasers or users.
Manufacturer will not be responsible for any amount of damage in excess of the retail
purchase price of the product under any circumstances. Incidental and consequential
damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to damage
to units from misuse or incorrect installation/connection. Misuse includes wiring or
connecting to improper polarity power sources.
RETURN/REPAIR POLICY: Defective products may be returned to manufacturer. Any
defective product that is returned to manufacturer within 30 days of the date of purchase
will be replaced free of charge. If such a product is returned more than 30 days but less
than two years from the purchase date, manufacturer will repair the unit or, at its option,
replace it, free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at
manufacturer’s option. A unit may be replaced with a new or reconditioned unit of the
same or comparable design. The repaired or replaced unit will then be warranted under
the terms of the remainder of the warranty period. The customer is responsible for the
shipping charges on all returned items. During the warranty period, manufacturer will be
responsible for the return shipping charges to the customer in the United States.
LIMITATIONS: This warranty does not cover accessories, such as charging adapters,
bulbs, fuses and batteries, damage or defects resulting from normal wear and tear
(including chips, scratches, abrasions, discoloration or fading due to usage or exposure
to sunlight), accidents, damage during shipping to our service facility, alterations,
OPERATING THE UNIT CORDED
Insert the Adapter’s DC Connector of the AC/DC Charging/Power
Adapter into the 12 Volt DC Charging Port. Insert the plug end into
a (powered) standard North American 120 Volt 60Hz outlet.
Operate the unit as outlined in the previous section.
RECHARGING THE UNIT
Insert the Adapter’s DC Connector of the AC/DC
Charging/ Power Adapter into the 12 Volt DC Charging Port.
Insert the plug end into a (powered) standard North American
120 Volt 60Hz outlet. The red Charging Indicator LED will light
to indicate the unit is charging.
Notes:
Do not charge for longer than 8 hours.
Charge or power this unit ONLY with the originally
supplied Class 2 transformer. Consult manufacturer for
replacement.
Battery Disposal
This unit contains an Ni-MH battery and should
be disposed of properly. For more information on
recycling batteries, call toll-free (800) 822-8837.
WARNINGS
• Do not dispose of the battery in fire. This may result in
an explosion.
• Before disposing of the battery, protect exposed
terminals with heavy-duty electrical tape to prevent
shorting, which can result in injury or fire.
• Do not expose the battery to fire or intense heat as it
may explode.
2
3
WLB26B_ManualEN_072606_SE.qxp 7/26/06 2:44 PM Page 2
