8
BREWING A CARAFE
1. Make sure your Café Select™ is in ready mode and the
power button LED
is lit. (See the Before Brewing
section for assistance.)
2. Fill water reservoir with desired amount of water. The
MAX line represents a full carafe of coffee. Do not fill
reservoir past this MAX line.
3. Place a #4 paper cone filter into the brew basket
above the full carafe.
4. Add one tablespoon of ground coffee per cup, or to
taste.
5. Ensure brew basket is secured in place and close filter
basket lid.
6. Place carafe on carafe plate with lid closed. Coffee
may run over if carafe lid is not correctly in place.
7. Press your brew strength preference, Reg or Robusto,
to start the brew cycle.
8. While brewing, the Sneak-A-Cup™ feature stops coffee flow
out of the unit, allowing you to pour a cup of coffee before
the brew cycle finishes. Always return the carafe on to the
carafe plate within 20 seconds to prevent coffee overflow.
9. The keep hot carafe plate will remain on for two hours
before automatically shutting off.
10. To turn off the coffeemaker at any time, press the
power button
.
11. When coffee grounds are cool, carefully remove and
dispose of the used grounds and paper filter.
6 8 10 12 16 20oz.
Removable
water reservoir
Tanque de agua removible