background image

Accessories

Recommended accessories for use with your mower are available from your local dealer or authorized service center. If you need assistance

regarding accessories, please call: 

1-800-544-6986

WARNING:

The use of any accessory not recommended for use with this tool could be hazardous.

p/n 90550646 MULCH INSERT

p/n 242867-00 SIDE DISCHARGE CHUTE 

p/n 242501-05 REPLACEMENT GRASS BAG 

MB-1800 REPLACEMENT BLADE

 HERE ARE SOME HELPFUL HINTS TO GET THE MOST FROM YOUR BLACK & DECKER 

CORDLESS MOWER...AND KEEP YOUR LAWN  LOOKING BEAUTIFUL

1. Lawns should first be mowed in the spring when the grass is about 2-1/2 to 3 inches (63mm) to (76mm) high. Mowing too early restricts the grass

root systems which renew themselves every spring. New grass should be mowed when it is about 2-1/2 inches (63mm) high.

2. Do not remove too much grass blade surface at one time...never more than 1/3 of the leaf height during each cutting. Cutting too close “shocks” sen-

sitive grass blades, resulting in a shallow root system and thus making it more difficult for your lawn to reach water in the soil.

3. Lawn care experts say that excessively close cutting is responsible for much of the difficulty experienced on many lawns. The depth and strength of

the roots of grass are almost exactly proportional to its growth. Grasses of mature lawns often are seriously injured when mowed shorter than 1-1/2

inches (38mm), and a height of 1-1/2 to 2  inches (38mm) to (51mm) is preferred on large lawns.

4. Mow your lawn when it is dry to avoid clumping of wet grass. If you have a choice, late afternoon is the ideal time for mowing, not only because the

grass is dry, but also because the sensitive new cut area of the grass will not be exposed to intense sunlight.

5. Keep the mowing blade sharp for a nice clean cut. This improves the mowerʼs performance and enhances the look of your lawn. A dull blade shatters

and bruises the tips of the grass. This impairs the healthy growth of your lawn and increases susceptibility to turf diseases. If the grass tips are

bruised it causes a brownish colour and gives your lawn an unhealthy appearance. A dull blade may also pull up young seedlings.

6. Try to mow your lawn at the same (consistent) cutting height. While there are times when you should vary the cutting height with the changing sea-

sons, a consistent cutting height produces a healthier, lovelier lawn with generally fewer weeds. Mow more frequently during periods of fast growth.

Frequent cutting ensures that the lower, less attractive portion of the grass will not show.

7. If your lawn has grown too long, (a vacation, for example, may interrupt your cutting schedule) mow at a cutting height one or two positions higher

than normal. A second pass at “normal” cutting height a few days later will put your lawn back on schedule. Changing the cutting height is a simple

matter with Black & Deckerʼs Single Lever Wheel Height Adjustment, which simultaneously adjusts all four wheels at once.

8. During the spring and fall, (or after an interruption to the cutting schedule) the grass will be longer and thicker. If the motor continually slows down

while cutting, try setting the wheels for a higher cutting height. Excessive motor loading can result in uneven cutting and quicker discharge of the 

battery.

9. Three good ideas to enhance your lawnʼs appearance: Vary the mowing direction frequently; mow horizontally on hillsides; (this is also a good safety

practice) and do not forget to overlap the mowing path on each pass.

10. Always mow grass so that clippings are discharged onto cut lawn. This will keep your lawn looking fresh by avoiding “Cut Grass” build-up which will

eventually brown and appear ugly. This method also preserves your battery charge, ensuring you get the most from your Black & Decker Cordless

Power Mower.

11. During the spring and fall seasons when the grass is longer and thicker, you can use your mower without its battery being fully recharged. (i.e. green

charge indication light is on). This will enable you to perform short cutting tasks, but we donʼt recommend this be done frequently. The battery and

mower perform much better if charged fully.

Service Information

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether

you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service

location, refer to the yellow page directory under "Tools—Electric" or call: 

1-800-544-6986 or visit www.blackanddecker.com

WARRANTIES

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be

replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a

participating retailer). Returns should be made within the time period of the retailerʼs policy for exchanges (usually 30 to 90 days after the sale).

Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for

exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our

option. Proof of purchase may be required.Black & Decker owned and authorized Service Centers are listed under "Tools-Electric" in the yellow

pages of the phone directory.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to

state or province to province. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is

not intended for commercial use.

FREE WARNING LABEL REPLACEMENT

: If your warning labels become illegible or are missing, call 

1-800-544-6986 

for a free replacement.

LATIN AMERICA:

This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country specific

warranty information contained in the packaging, call the local company or see the website for warranty information.

Deck Warranty

Lifetime Warranty for DECK only against any defects in material or workmanship.

14

Summary of Contents for CM1836

















































Reviews: