EN
15
INFLATION GUN
4
For inflating tires, rubber dinghies, air beds, footballs and other objects
Warning: Do not direct the jet of compressed air towards people or
animals.
Never inflate the objects above the recommended inflation pressure as
this may be dangerous and cause damage and/or injuries.
The gun is not suitable for inflating car tires. For this operation, use of the
approved inflation gun that can be purchased separately is recommended.
USE
1) Connect the inflation gun
11
to the compressor as explained in chapter
“2 - CONNECTING THE ACCESSORIES TO THE COMPRESSOR”
2) When inflating
tires
or certain
bicycle tires
, it is not necessary to insert
any of the adapters (
fig. 7
). Press tab
E
(
fig. 5
) and connect the hose of
the gun to the tire pushing the fitting on the valve and then releasing the
tab.
3) Inflate the tire pressing lever
F
(
fig. 6
). Release the lever and read the
pressure reached on gauge
G
of the gun. Repeat the operation until the
pressure required is obtained. In the case of over-inflation, press button
H
to reduce inflation pressure
Warning:
do not hold down the lever too long before checking the pressure
reached as this could cause explosion of the object being inflated.
4) When inflating
footballs, rubber dinghies, certain bicycle tires
and
children’s inflatable swimming-pools
, you may have to use a suitable
adapter (
fig. 7
)
Adapter
8
is used for footballs
Adapter
9
is used for rubber dinghies, air beds and children’s swimming-
pools
Adapter
10
is used for certain bicycles
Select the suitable adapter and push it in the inflation hose pressing tab
E
(
fig. 8
). Once it is inserted, release tab
E
.
To secure the adapter, turn it slightly in a clockwise direction
5) Inflate the object concerned as described in point
3)
.
TIPS FOR USING THE INFLATION GUN
Use the inflation gun at least once every two weeks in order to check that
your tires are at the right pressure; this promotes fuel economy, increases the
service life of your tires and improves safety as it reduces braking distances
and improves handling of the vehicle.
MAINTENANCE
Do not clean the inflation gun and adapters with solvents or flammable or
toxic liquids.
BLOWER NOZZLE
5
To remove dust and dirt.
Warning: it is advisable to wear safety goggles when using the blower gun.
Do not direct the jet of compressed air towards people or animals.
Take care not to blow dust and dirt towards yourself or other persons.
USE
1) Unscrew the inflation hose (
B
) from the body of the inflation gun (
A
) (
fig.
1
). Screw the blower nozzle (
13
) on the body of the gun and tighten (
fig.
2
). A wrench may be necessary to facilitate this operation.
2) Connect the gun to the compressor as explained in chapter «2 –
CONNECTING THE ACCESSORIES TO THE COMPRESSOR».
3) 3-Aim the gun at the surface to be cleaned and press the lever
F
(
fig. 9
).
The flow of air can be adjusted depending on how far you press down
lever
F
.
TIPS FOR USING THE BLOWER GUN
Clean the carpets of your home or car mats very efficiently using the blower
gun. It is also ideal for keyboards, electrical items, refrigerators, cameras, TV
cameras, glassware and the filters of vacuum cleaners (
fig. 10
).
Warning:
when using the blower gun on delicate or precision equipment (TV
cameras, camera lenses, etc.) reduce the pressure of the jet to minimum
value.
MAINTENANCE
Do not clean the gun with solvents, flammable or toxic fluids.
OTHER USES
6
Other uses are possible purchasing the accessories separately.
Summary of Contents for CUBO
Page 9: ...9 14 11 13 A 15 1 8 10 9 12 B ...
Page 10: ...10 A 1 2 B 3 4 13 D 9 10 E 8 C C 5 7 6 8 E F H G E ...
Page 11: ...11 F 9 10 ...
