background image

•  READ ALL INSTRUCTIONS BEFORE USING.
•  Use iron only for its intended use.
•  To protect against a risk of electric shock, 

do not immerse the iron in water or other 
liquids.

•  The iron should always be turned to the 

minimum (min) setting before plugging or 
unplugging from outlet. Never yank cord to 

disconnect from the outlet; instead grasp 
plug and pull to disconnect.

•  Do not allow cord to touch hot surfaces. Let 

iron cool completely before putting away. 

Loop cord loosely around iron when storing.

•  Always disconnect iron from electrical 

outlet when filling with water or emptying, 
and when not in use.

•  Do not operate iron with a damaged 

cord, or if the iron has been dropped or 
damaged. To avoid the risk of electric 

shock, do not disassemble the iron; 
take it to a qualified service person 
for examination and repair, or call the 

appropriate toll-free number. Incorrect 
reassembly can cause a risk  
of electric shock when the iron is used. 

•  Close supervision is necessary for any 

appliance being used by or near children. 
Do not leave iron unattended while 
connected or on an ironing board.

•  Burns can occur from touching hot metal 

parts, hot water or steam. Use caution 
when you turn a steam iron upside down 
or use the surge of steam – there may 
be hot water in the reservoir. Avoid rapid 
movement of iron to minimize hot water 
spillage.

•  The iron must not be left unattended while 

it is connected to the supply mains.

•  The plug must be removed from the socket-

outlet before the water reservoir is filled 
with water.

•  The iron must be used and rested on a 

stable surface.

•  When placing the iron on its stand, ensure 

that the surface on which the stand is 

placed is stable.

•  The iron is not to be used if it has been 

dropped, if there are visible signs of 
damage or if it is leaking. 

SPECIAL INSTRUCTIONS

•  To avoid circuit overload, do not operate 

another high wattage appliance on the 
same circuit.

•  If an extension cord is absolutely necessary, 

a 15-ampere cord should be used. Cords 
rated for less amperage may overheat. Care 
should be taken to arrange the cord so that 
it cannot be pulled or tripped over. 

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safely precautions should  

always be followed, including the following:

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade 
is wider than the other). To reduce the risk of 

electric shock, this plug is intended to fit into 
a polarized outlet only one way. If the plug 
does not fit fully into the outlet, reverse the 
plug. If it still does not fit, contact a qualified 
electrician. Do not attempt to modify the plug 
in any way. 

TAMPER-RESISTANT SCREW

Warning:

 This appliance is equipped with a 

tamper-resistant screw to prevent removal of 
the outer cover. To reduce the risk of fire or 
electrical shock, do not attempt to remove 
the outer cover. There are no user-serviceable 
parts inside. Repair should be done only by 
authorized service personnel. 

Note: 

If the power supply cord is damaged, it 

should be replaced by qualified personnel or in 
Latin America by an authorized service center. 

SAFETY FEATURES

3

Summary of Contents for D2030





















Reviews: