• The unit beeps. Once the beeping stops, AUTO OFF flashes on
the digital display window to let you know the iron has stopped
heating
(E)
.
• After a few minutes, the digital display light goes off.
IMPORTANT:
AUTO OFF will continue to blink until the iron is
turned off, unplugged or if you move it.
• Remember: The iron will remain hot to the touch!
• If you pick up the iron, it activates an internal motion sensitive detector and the iron
will start heating again. You might have to move the iron or shake it gently. The digital
display light comes on and the set temperature is displayed again.
Note: Wait for iron to reheat completely before resuming operation.
Smart Steam™ Technology
The Smart Steam™ system generates steam only at higher
temperature settings (between 4 and 7)
(F)
. Once you select
the temperature, the Smart Steam™ technology detects the set
temperature and adjusts the steam power accordingly. The higher
the setting, the more powerful the steam.
Surge of Steam
•
Horizontal
Use to remove stubborn creases.
1.
With the water tank filled to the MAX mark, set fabric-select dial to appropriate setting
(between 4 and 7) for your fabric. Read garment's label to help you determine fabric
type.
Note: Steam is automatically turned off between settings 1 and 3.
2. Once you select the appropriate setting, wait for iron to beep
and display READY.
3. Press the surge-of-steam button to generate a burst of steam
(G)
. For best performance, leave an interval of 5 seconds
between bursts.
Important:
Always stand the iron on its heel rest when powered on
but not in use.
•
Vertical
Use for removing wrinkles from hanging clothes and drapes.
1. Be sure the water tank is filled to the MAX mark.
2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be
steamed once they are hung.)
3. Set the fabric-select dial to appropriate setting (between 4 and 7) for your fabric.
4. Wait for iron to beep and display READY.
5. Hold the iron close to, but not touching, the fabric.
6. Pull the fabric tight in your free hand and pump the
surge-of-steam button
as you move the iron over the
fabric
(H)
.
Important:
Always stand the iron on its heel rest when powered on
but not in use.
6
5
Using Spray
Use to dampen tough wrinkles at any setting
(J)
.
1. Be sure the iron is filled with water.
2. On first use, pump the spray button
several times.
ANTI-DRIP SYSTEM
The anti-drip system prevents water spotting at low temperatures.
Dry Ironing
1. Turn the fabric-select dial to setting 1, 2, or 3 to iron without
steam
(K)
. The Smart Steam™ system will automatically turn off
and there will not be any steam generated.
2. To dry iron at higher settings, empty the water from the reservoir
to prevent steaming.
Emptying Water Tank (Optional)
Note: It is not necessary to empty the water after each use.
1. Unplug the iron and let it cool.
2. To release the water, hold the iron over a sink with the tip
pointing down. Water will empty out of the water-fill hole
(L)
.
DIGITAL DISPLAY LANGUAGE
Your iron has a multilingual digital display that lets you select from
the English, French or Spanish language.
1. When you plug in the iron, the display defaults to English.
To change the language, press and hold the change language
button for 2-4 seconds
(M)
. The digital display changes to
French.
2. Press and hold the button for another 2-4 seconds to change from French to Spanish.
3. To go back to English, press the button again for 2-4 seconds.
Note: The languages will change in the order listed above.
4. Once you unplug the iron, the language will default to English again.
Care and Cleaning
This product contains no user-serviceable parts. Refer service to qualified service
personnel.
Cleaning Outside Surfaces
1. Make sure iron is unplugged and has cooled completely. Wipe the soleplate and outer
surfaces with a soft cloth dampened with water. Add mild household detergent. Never
use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch
or discolor the iron.
2. After cleaning, steam iron over an old cloth to remove any residue from the
steam vents.
Auto Cleaning
To keep the steam vents free of any buildup, about once a month follow these instructions.
1. Fill the water tank well below the MAX line. Plug in the iron.
2. Turn the fabric-select dial to 7 and stand the iron on its heel rest.
MA
X
AUTO CLEAN
G
L
M
AX
A
U
TO
C
LE
A
N
H
MA
X
AUTO CLEAN
J
M
AX
A
U
TO
C
LE
A
N
M
F
K
E
