8
Bagel Function |
No preheat needed for this function.
1. Press the Bagel function button (
). The blue light will illuminate and flash.
2. The oven will either default to factory function settings or to the last setting
used. (see Function Chart on page 10)
3. If needed, press the time/toast shade button (
) to select the desired
shade. Up arrow for a darker shade, and Down for a lighter shade.
Note: Shades 1-7 are available, 1 being the lightest and 7 being the darkest.
4. Place food directly on rack in the middle rack position and press the Start/Stop
button (I/0) to begin toasting.
5. There will be an audible beep once the toasting cycle is complete and the oven
will stop heating.
6. Unplug the appliance when not in use.
Reheat Function |
No preheat needed for this function.
1. Press the Reheat function button ( ). The blue light will illuminate and flash.
2. The oven will either default to factory function settings or to the last setting
used. (see Function Chart on page 10)
3. If needed, press the temperature button ( ) to select the desired
temperature. Up arrow for a higher temperature, and Down for a lower
temperature.
4. If needed, press the time buttons ( ) to select the desired time. Up arrow
for a longer time period, and Down for a shorter time period. Select Stay On
by pressing the Down arrow past Zero. The Stay On icon ( ) will show in
the display panel.
5. Place food on middle or low rack and press the Start/Stop button (I/0) to
begin reheating the food.
Note: Use a metal, oven-tempered glass, or ceramic baking dish.
6. If using the oven timer, there will be an audible beep once the cycle is complete
and the oven will stop heating. If not using the timer, press the Start/Stop
Button (I/0) once cycle is complete.
7. Unplug the appliance when not in use.
OPERaTING YOUR OVEN
Summary of Contents for Dining-in TO3280SSD
Page 1: ......
