background image

3

GENERAL SAFETY RULES FOR ALL

FREEWIRE PRODUCTS

WARNING: 

Read and understand all

instructions.

Failure to follow all

instructions listed below may result in
electric shock, fire, property damage and/or
serious personal injury. For additional
information refer to the manual which came
with your FREEWIRE kit.

SAVE THESE

INSTRUCTIONS

WARNING:

Do not use any FREEWIRE

product to control any device where
unexpected or unattended turn on/off
could cause serious personal injury
and/or property damage. 
Interference,
interruptions, or surges in the electrical
system, or malfunction may cause
unexpected turn on/off of plugged in
devices.

WARNING:

Do not use any FREEWIRE

product to control any device where
failure to operate could cause serious
personal injury and/or property
damage. 
Interference, interruptions or
surges in the electrical system, or
malfunction may cause plugged in
devices to fail to operate as expected.

WARNING:

Do not use any FREEWIRE

product to control any medical device.
Using any FREEWIRE product to control
any type of medical device could result in
serious personal injury.

WARNING:

To reduce the risk of

electric shock, do not use any type of
plug adaptor with this product.

WARNING:

Do not use a Bulb

Receiver, Lamp Receiver, Messenger
Hub or Outdoor Lamp Receiver to
control an appliance
. Using a Bulb
Receiver, Lamp Receiver, Messenger
Hub or Outdoor Lamp Receiver to control
an appliance could damage the appliance
or the receiver, which could result in
serious personal injury and/or property
damage.

WARNING: 

Do not use a Bulb Receiver

or Lamp Receiver to control a lamp or
fixture that already has a dimmer on it
.
Using a Bulb Receiver or Lamp Receiver
to control a lamp or fixture that already
has a dimmer on it could damage the
lamp, fixture or receiver, which could
result in serious personal injury and/or
property damage.

WARNING:

Do not use any FREEWIRE

product to control any device that
exceeds the rating for that FREEWIRE
product. 
Using a FREEWIRE product to
control a device that exceeds the rating

for that product could result in serious
personal injury and/or property damage.
The ratings for FREEWIRE products are
as follows:

•    BULB RECEIVER - 150 watts -
incandescent bulbs only.
•  LAMP RECEIVER - 300 watts - lamps
with incandescent bulbs only.
•  MESSENGER HUB - 500 watts -
lamps with incandescent bulbs only.
•  OUTDOOR LAMP RECEIVER - 500
watts - lamps with incandescent,
fluorescent, halogen or low voltage bulbs
only.
•  APPLIANCE RECEIVER - 15 amp
resistive load small appliances, 1/3HP
motor load, 500 watts lamps with
incandescent, fluorescent or halogen
bulbs only, 400 watts for televisions.
•  HARDWIRE SWITCH - 500 watts -
incandescent bulbs only.

WARNING:

To reduce the risk of

electric shock or fire, do not expose
any FREEWIRE product to rain or
moisture. 
If a FREEWIRE product is
exposed to rain or moisture, immediately
disconnect the FREEWIRE product from
the AC outlet to reduce the risk of electric
shock or fire and consult authorized
service personnel. NOTE: Outdoor Lamp
Receiver may be used outdoors. Bulb
Receiver may also be used outdoors if
mounted in correct orientation. Motion
Detector and Monitoring Camera may be
used outdoors when mounted as per
instructions.

WARNING:

To reduce the risk of

electric shock, do not disassemble any
FREEWIRE product. 
No user-serviceable
parts are inside.

WARNING:

Use only incandescent

bulbs in lights that are to be controlled
by the Hardwire Switch. 
Using any other
type bulbs could damage bulbs and/or
Hardwire Switch.

WARNING:

Do not use any intercom or

monitoring system, including a baby
monitor, that uses the house wiring to
transmit signals in permanent transmit
(or talk) mode when using FREEWIRE
products. 
Transmissions from an
intercom or monitoring system that uses
the house wiring to transmit signals could
interfere or block out FREEWIRE
transmissions in permanent transmit (or
talk) mode. It is also possible that a
neighbor's intercom or monitoring system
could cause unexpected operation,
including failure to operate, of your
FREEWIRE system, or that your
FREEWIRE SYSTEM could cause
unexpected operation, including failure to

622715-00 Master Remote manual  2/4/04  9:17 AM  Page 3

Summary of Contents for freewire


















Reviews: