Black & Decker FSM1630-XE, Original Instructions Manual

7

ENGLISH

(Original instructions)

Features

This appliance includes some or all of the following features.

  1. ON/Off switch

  2. Smartselect

TM

 button

  3. Removable water tank

  4. Handle

  5. Steam head

  6. Steam head cleaning pad

  7. Delta head cleaning pad

  8. Resting mat

  9. Carpet glider

 10. Bottom cable tidy hook

 11. Top cable tidy hook

 12. Cable management clip

Assembly

Warning! Before attempting any of the following operations, 

make sure that the appliance is switched off and unplugged 

and that the appliance is cold and does not contain any water.

Attaching the handle (Fig. A)



  Slide the bottom end of the handle (4) into the top end of 

the steam mop body (13) until it clicks into place.

Attaching the steam head (Fig. B)



  Slide the bottom end of the steam mop body (13) onto the 

steam head (5) until it clicks into place.



  The steam head can be removed from the Steam mop 

body by pressing the steam head release button (14) and 

pulling the steam mop body (13) off the steam head (5).

Attaching the water jug (Fig. C)



  Clip the water jug (3) onto the handle (4).



  Slide the water jug (3) down into the Steam mop body 

Attaching a cleaning pad (Fig. D)

Replacement cleaning pads are available from your Black & 

Decker dealer:- (cat. no. FSMP20-XE).



loop’ side facing up.



  Lightly press the steam mop down onto the cleaning pad 

(6 or 7). 

Caution! Always place your steam mop on the resting mat (8) 

with the handle (4) in the upright position when stationary and 

make sure the steam mop is turned off when not in use.

Removing a cleaning pad (Fig. E)

Caution! Always wear suitable shoes when changing the 

cleaning pad on your steam mop. Do not wear slippers or 

open toed footwear.



  Return the handle (4) to the upright position and turn the 

steam mop ‘OFF’. 



  Place the steam mop on the resting mat and wait until it 



  Place the front of your shoe onto the cleaning pad removal 



  Lift the steam mop up off the cleaning pad.

Caution! Always place the steam mop on the resting mat (8) 

with the handle (4) in the upright position when stationary and 

make sure the steam mop is turned off when not in use.

Attaching the carpet glider (Fig. F)





  Lightly press the steam mop down onto the carpet glider 

(9) until it clicks into place. 

Caution! Always place the steam mop on the resting mat (8) 

with the handle (4) in the upright position when stationary and 

make sure the steam mop is turned off when not in use.

Removing the carpet glider (Fig. F)

Caution! Always wear suitable shoes when changing the 

carpet glider on your steam mop. Do not wear slippers or 

open toed footwear.



  Return the handle (4) to the upright position and turn the 

steam mop ‘OFF’. 



  Place the steam mop on the resting mat and wait until it 



  Place the front of your shoe onto the carpet glider removal 



  Lift the steam mop up off the carpet glider (9).

Caution! Always place the steam mop on the resting mat (8) 

with the handle (4) in the upright position when stationary and 

make sure the steam mop is turned off when not in use.

The Delta Head (Fig. G)

This Steam Mop incorporates a built in delta head which 

enables you to access into tight corners and narrow gaps.

Caution! Always wear suitable shoes when accessing the 

delta head on your steam mop. Do not wear slippers or open 

toed footwear.



  Return the handle (4) to the upright position and turn the 

steam mop ‘OFF’. 



  Place the steam mop on the resting mat and wait until it 



  Place the front of your shoe onto the steam head removal 

tab (18) and press down gently.



  Lift the delta head (17) up off the steam head (5).



  Fit the delta head cleaning pad to the bottom of the delta 

head.