Black & Decker FSMH1621, Original Instructions Manual

5

ENGLISH

(Original instructions)

Intended use 

Your Black & Decker steam mop has been designed for 

sanitising and cleaning sealed hardwood, sealed laminate, 

linoleum, vinyl, ceramic tile, stone and marble floors and for 

refreshing carpets. This appliance is intended for indoor 

household use only.

Warning! Read all of the 'Safety, Maintenance, 

Service' manual carefully before operating 

this appliance.

Read all of this manual carefully before operating 

the appliance.

Features

This appliance includes some or all of the following features.

  1. ON/Off switch

  2. Lock off button

  3. Trigger switch

  4. Steam nozzle

  5. Hand held steam cleaner

  6. Autoselect

TM

 button

  7. Filler cap

  8. Water tank

  9. Steam mop body

 10. Handle

 11. Steam head

 12. Steam head cleaning pad

 13. Resting mat

 14. Carpet glider

 15. Bottom cable tidy hook

 16. Top cable tidy hook

 17. Cable management clip

 18. Jug

Accessories

This appliance includes some of the following accessories 

others are available to purchase from the Black & Decker 

website.

The performance of your appliance depends on the accessory 

used. Black & Decker accessories are engineered to high 

quality standards and designed to enhance the performance 

of your appliance. By using these accessories you will get the 

very best from your appliance.

Flexible hose and handle
For convenient use of all accessories.

Variable steam jet nozzle
For higher pressure steam bursts, twist to change 
the spray pattern of the steam burst.

Small brush (Blue)
For cleaning bathrooms.

Small brush (Yellow)
For cleaning kitchens.

Small brush (Green) 
For cleaning toilets.

Small Squeegee
For cleaning glass doors and windows.
Warning! Do not use the window squeegee on cold 
glass. It may cause the glass to break.

Assembly

Warning! Before attempting any of the following operations, 

make sure that the appliance is switched off and unplugged 

and that the appliance is cold and does not contain any water.

Attaching the handle (Fig. A)

u

Slide the bottom end of the handle (10) into the top end of 

the steam mop body (9) until it clicks into place. The arrow 

on the handle (10) should be aligned with the top of the 

steam mop body (9).

Attaching the steam head (Fig. B)

u

Slide the bottom end of the steam mop body (9) onto the 

steam head (11) until it clicks into place.

u

The steam head can be removed from the Steam mop 

body by pressing the steam head release button (19) and 

pulling the steam mop body (9) off the steam head (11).