11
USING THE S BLADE
1.
The S blade is used for mixing and chopping a variety of
foods.
2. Remove protective cover from S blade and place the S
blade on a flat surface. Hold the plastic center tightly in
place and very carefully align the tabs of the spindle with
the S Blade and insert spindle into top of blade (A). Push
down to secure (B).
3. Place S Blade and spindle assembly on center post of
processing bowl, pushing down to lock.
Warning:
Blades are sharp; Caution should be taken when
handling the blades.
4. Place food to be processed in the food processor bowl
around the blade. Assemble the food processor lid and
attach motor base to lid as directed in USING THE FOOD PROCESSOR BOWL.
5. Press and hold the ON|OFF button or pulse ON|OFF to process.
6. Once finished processing, unplug the appliance, detach the motor base and
remove the lid from the bowl.
7. To remove the blade from the spindle, place assembly on a flat surface. Hold
the center of the blade tightly against the surface and pull up on the spindle.
USING THE SLICING AND SHREDDING DISK
1.
Place the spindle on the center post in the food processing bowl, pushing down
to lock.
Note:
Make sure the S Blade is removed from the spindle before using the disk.
2. There is a side for shredding and a side for slicing on the slicing and shredding
disk. Place the side desired for food prep UP. Align the hole in the center of the
disk with the top of the spindle and ensure that it is pushed down firmly in place.
3. Assemble the food processor lid and attach motor base to lid as directed in
USING THE FOOD PROCESSOR BOWL. Press and hold the ON|OFF button to
turn the appliance on. Slowly add ingredients to the feed chute or funnel.
4. To disassemble, lift the disk off the spindle.
USING THE EMULSIFYING DISK
1.
Hold the emulsifying disk in one hand and the spindle in the other hand. Align
the tabs of the spindle with the tabs of the disk and push down to attach.
2. Place the spindle on the center post in the food processing bowl, pushing down
to lock.
3. Add ingredients to the bowl and attach the lid and motor base to begin
emulsifying.
4. Slowly add oil through the funnel.
5. To disassemble, hold the disk in one hand and pull the spindle out of the disk.
Summary of Contents for HB5500 Handiprep Express
Page 1: ...TM 6 IN 1 KITCHEN SYSTEM SISTEMA DE COCINA 6 EN 1 APPAREIL CULINAIRE 6 EN 1 HB5500 ...
Page 48: ...48 ...
Page 49: ...49 ...