Black & Decker HP9048, Manual

8

Screw size 

Pilot hole ø  

Pilot hole ø  

Clearance hole 

(softwood) 

(hardwood)

No. 6 (3.5 mm)  2.0 mm 

2.5 mm 

4 mm

No. 8 (4 mm) 

3.2 mm 

3.5 mm 

5.0 mm

No. 10 (5 mm)  3.5 mm 

4.0 mm 

5.7 mm

Accessories

The performance of your tool depends on the accessory used. 

Black & Decker and Piranha accessories are engineered to 

high quality standards and designed to enhance the performance 

of your tool. By using these accessories you will get the very 

best from your tool.

This tool uses screwdriver bits and drill bits with a 1/4" (6.35 mm) 

hexagonal shank. Piranha Super-lok accessories are 

designed for use with this tool.

Maintenance

Your Black & Decker tool has been designed to operate over a 

long period of time with a minimum of maintenance. 

Continuous satisfactory operation depends upon proper tool 

care and regular cleaning.

Your charger does not require any maintenance apart from 

regular cleaning.

Warning!

 Before performing any maintenance on the tool, 

remove the battery from the tool. Unplug the charger before 

cleaning it.



  Regularly clean the ventilation slots in your tool and 

charger using a soft brush or dry cloth.



  Regularly clean the motor housing using a damp cloth.  

Do not use any abrasive or solvent-based cleaner.



  Regularly open the chuck and tap it to remove any dust 

from the interior.

Protecting the environment

Z

Separate collection. This product must not be 

disposed of with normal household waste.

Should you find one day that your Black & Decker product 

needs replacement, or if it is of no further use to you, do not 

dispose of it with household waste. Make this product 

available for separate collection.

z

Separate collection of used products and packaging 

allows materials to be recycled and used again.  

Re-use of recycled materials helps prevent 

environmental pollution and reduces the demand for 

raw materials.

Local regulations may provide for separate collection of 

electrical products from the household, at municipal waste 

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and 

recycling of Black & Decker products once they have reached 

the end of their working life. To take advantage of this service 

please return your product to any authorised repair agent who 

will collect them on our behalf.

You can check the location of your nearest authorised repair 

agent by contacting your local Black & Decker office at the 

address indicated in this manual. Alternatively, a list of 

authorised Black & Decker repair agents and full details of our 

after-sales service and contacts are available on the Internet 

at: 

www.2helpU.com

Battery (fig. G)

h

If you want to dispose of the tool yourself, the 

battery must be removed as described below and 

disposed of in accordance with local regulations.

Warning!

 Do not short-circuit the battery terminals.



  Run the battery down completely.



  Remove the screw (16) from the housing.



  Remove the battery cover (17).



  Pull the battery out and disconnect the wires to remove it 

from the tool.



  Place the battery in a suitable packaging to ensure that 

the terminals cannot be short-circuited.



  NiCd and NiMH batteries are recyclable. Take them to any 

authorised repair agent or a local recycling station.

Technical data

  HP9060

Voltage 

V

DC

  6

No-load speed 

min

-1

  180-600

Max. torque 

Nm  9

Bit holder 

  1/4" (6.35 mm)

Max. drilling capacity in

 steel/wood 

mm  4/6

Weight 

kg  0.78

Charger

Input voltage 

V

AC

  230

Approx. charging time 

h  9

Weight 

kg 

0.2