background image

ENGLISH - 1

Safety apparel:
Approved protective goggles or
visor, approved hard hat and
hearing protection

Safety apparel:
Approved gloves

CAUTION!
• Use the hedge trimmer properly in order to avoid injuries.
• Follow the instructions and precautions for reasonably safe, efficient use
of the product.
• It is the responsibility of the user to follow the instructions and precau-
tions provided in the manual supplied with the product.
Note the illustrations at the beginning of the manual. Every section of the
text in the manual refers to the illustration bearing the same letter

Warning

Read the instructions for the user
carefully and make sure you
understand how all the controls
work.

Key to symbols

1)

BLADES

2)

BLADE GUIDE

3)

FUEL CAP

4) FRONT 

HANDLE

5) STARTER 

HANDLE

6) CYLINDER 

COVER

7) SPARK 

PLUG

8) HANDLE

9)  THROTTLE CONTROL TRIGGER

10) STOP SWITCH

11) GEAR BOX

12) GREASE GUN

13) SAFETY LEVER

14) AIR FILTER

15) CHOKE CONTROL

16) FUEL ENRICHMENT LEVER

17) HANDLE LOCK KNOB

18) FRONT HANDLE LOCK LEVER

19) HAND GUARD

20) TRANSPORT GUARD

A. General Description

Safety precautions

LEGEND:

1) Guaranteed noise level according to

directive 2000/14/EC

2) Manufacturer's name and address

3) Year of manufacture

4) Product code

5) Serial no.

6) Model/type

7) CE marking of conformity

8) Displacement

Example of identification label

Summary of Contents for HT020











Reviews: