background image

ENGLISH - 3

C. SAFETY INSTRUCTIONS

General precautions

• Use the product only for the purpose for which

it was designed.

• Do not use this machine for any other purpose

than trimming or edging shrubs, hedges or
bushes.

• Always grip the machine firmly with both hands.
• Make sure you know how to stop the engine

and blades if necessary (see section on starting
and stopping the engine).

• CAUTION! The blades of the hedge trimmer

continue to move due to inertia even after the
engine has been switched off, so be very care-
ful of your hands as there is a real danger of
amputation of the fingers.

• Inspect the machine carefully prior to using it.
• Make sure there are no loose screws, damaged

parts or fuel leakage. 

• THE ENGINE EXHAUST FUMES ARE POISO-

NOUS TO BREATHE AND MAY CAUSE ASFIXI-
ATION AND DEATH 

• Never allow children to use this machine.
• Never allow children or persons who are not

familiar with these instructions and sufficiently
trained to use the hedge trimmer. Local regula-
tions may indicate age limits for use.

• Anyone who uses the machine should be famil-

iar with the instructions for safe use of it as
described in this manual, and should be
instructed in the proper cutting techniques to
use, possibly by practical demonstration.

• Keep this manual with the machine when selling

or lending it to others so that the future users
can familiarize themselves with the product and
the instructions for safe use.

• Wear properly fitting protective working clothes

of approved type. Wear non-slip footwear,
gloves, glasses and hearing protection.

• Do not wear loose clothing and jewelry that

could catch in the moving parts of the machine.

• Keep hair fastened or gathered so that is does

not hang below shoulder level.

• Examine the work area and be careful of any

hazards (such as roads, driveways, power lines,
hanging tree limbs, etc.).

• Remove any rubbish or refuse from the work

area such as cans, bottles, rocks, etc. 

• Any contact of the blades with other objects

could cause serious injury to the operator, other
people or animals in the vicinity and the
machine. 

• Never try to use a machine with any of its parts

missing or after any alterations have been made
to it by persons other than authorized service
personnel. 

• The operator or user is liable for any accidents

or damages to third parties or property, and for
the dangers to which they may be exposed.

• Take account of any hazard that may not be

perceived because of the noise of the machine.

• Make sure there is someone in the vicinity with-

in safe calling distance in case of any accidents.

• Never use the machine when you are tired or

under the influence of any substances like
drugs or alcohol that could affect your physical
conditions.

• When you transport the hedge trimmer in a

motor vehicle, place it in a stable fixed position
so that no fuel leaks out.

• During transportation or storage of the machine

always fit the blade guard on the blades to pre-
vent accidental injury. 

• ALWAYS USE ORIGINAL REPLACEMENTS

AND ACCESSORIES.

Precautions for safe use of the machine

• Make sure any other persons or animals in the

vicinity are at a safe distance (at least 10
meters). If necessary, use warning signals to
keep persons and animals at a safe distance. 

• If any fuel is spilled on the machine, make sure

the engine is completely dry before starting it.

• Keep the grips clean and dry 
• Never start the machine if the blades are dam-

aged or badly worn 

• If you wear the Electrolux safety visor, make

sure to remove the transparent protective film, if
any.

• Keep all parts of the body and clothing away

from the blades during startup and while the
engine is running.

• Always work from a stable position on your feet.
• Do not use the hedge trimmer while standing

on a ladder or other unstable support.

• When trimming tall hedges or bushes, use a

stable, safe platform and stand in a stable posi-
tion without the risk of losing your balance.

• If you strike an object accidentally, switch off the

engine immediately and examine the machine.

• Make sure the grip and hand guard are in place

during use of the machine.

• When trimming or edging, keep the engine run-

ning at high speed; these operations should not
be carried out with the motor running at low
speed.

• Never lift the hedge trimmer above shoulder

height when using it.

• Always wait for the motor to idle before moving

the machine from one section of the shrub or
hedge to another. 

• Stop the engine when changing to another

place or before examining the blades.

Summary of Contents for HT020











Reviews: