Black & Decker Jump starter, Manual

7



Monitor the pressure gauge (3) until the required 
pressure is reached.



Move the inflator on/off switch (1) to the off position (

0

).



Remove the adaptor, if fitted, or the nozzle (2) from the 
inflated item.



Remove the adaptor, if fitted, and store it in the inflator 
nozzle storage compartment (15).

Maintenance

Your Black & Decker corded/cordless appliance/tool has 
been designed to operate over a long period of time with a 
minimum of maintenance. Continuous satisfactory operation 
depends upon proper tool care and regular cleaning.

Warning! 

Before performing any maintenance on corded/

cordless power tools: 



Switch off and unplug the appliance/tool.



Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack. 



Or run the battery down completely if it is integral and 
then switch off.



Unplug the charger before cleaning it. Your charger 
does not require any maintenance apart from regular 
cleaning.

Regularly clean the ventilation slots in you appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do 
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust from 
the interior (when fitted).

Protecting the environment

Should you find one day that your Black & Decker product 
needs replacement, or if it is of no further use to you, do not 
dispose of it with household waste. Make this product 
available for separate collection.

Separate collection of used products and packaging 
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent 
environmental pollution and reduces the demand 
for raw materials. 

Local regulations may provide for separate collection of 
electrical products from the household, at municipal waste 
sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and 
recycling of Black & Decker products once they have 
reached the end of their working life. To take advantage of 
this service please return your product to any authorised 
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair 
agent by contacting your local Black & Decker office at the 
address indicated in this manual. Alternatively, a list of 
authorised Black & Decker repair agents and full details of 
our after-sales service and contacts are available on the 
Internet at: 

www.2helpU.com.



Do not short-circuit the battery terminals.



Do not dispose of the battery(s) in a fire as this may 
result in a risk of personal injury or an Explosion.



Run the battery down completely, then remove it from 
the tool.



Batteries are recyclable. Place the battery(s) in a 
suitable packaging to ensure that the terminals cannot 
be short-circuited. Take them to any authorised repair 
agent or a local recycling station.

Separate collection. This product must not be 
disposed of with normal household waste.

At the end of their useful life, discard batteries with 
due care for our environment: