9
u
u
Use
Warning!
Do not cover the ventilation slots when using the
The tool has an adaptor to connect it to a vacuum cleaner
when sanding wood. To connect the tool to a vacuum cleaner,
proceed as follows:
Warning!
Make sure that the tool is switched off and unplugged.
u
Fit the dust extraction connector (2) onto the adapter at
the back of the tool.
u
Connect the hose of a suitable vacuum cleaner to the
connector.
Use
Warning!
Let the tool work at its own pace. Do not overload.
Warning!
Before connecting the tool to the power supply,
make sure it is switched off.
u
To switch the tool on, press the part of the on/off switch (1)
marked 'I'.
u
To switch the tool off, press the part of the on/off switch (1)
marked '0'.
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning!
Before performing any maintenance, switch off and
unplug the tool.
u
Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at:
www.2helpU.com
KA160/KA161B
To claim on the guarantee, you will need to submit proof of
purchase to the seller or an authorised repair agent. You can
check the location of your nearest authorised repair agent by
indicated in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com
Statutory Warranties:
Our goods come with guarantees that cannot be excluded
under Australian Consumer Law. You are entitled to a replace-
ment or refund for a major failure and compensation for any
other loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable qual-
ity and the failure does not amount to a major failure.
Summary of Contents for KA160-XE
