Black & Decker KA165GT, Instruction Manual

4

Intended use

Your Black & Decker sander has been designed for sanding
and polishing wood, metal, plastics and painted surfaces.
This tool is intended for consumer use only.

Safety instructions

◆

Warning!

 When using mains-powered tools, basic safety

precautions, including the following, should always be
followed to reduce the risk of fire, electric shock, personal
injury and material damage.

◆

Read all of this manual carefully before operating the tool.

◆

Retain this manual for future reference.

◆

Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or
wet conditions. Keep the work area well lit. Do not use the
tool where there is a risk of causing fire or explosion, e.g. in
the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the
work area or to touch the tool or mains cable.

Dress properly

Do not wear loose clothing or jewellery, as these can be
caught in moving parts. Preferably wear rubber gloves and
non-slip footwear when working outdoors. Wear protective
hair covering to keep long hair out of the way.

Personal protection

Always use safety glasses. Use a face or dust mask whenever
the operations may produce dust or flying particles. Hearing
protection should be worn whenever the sound level seems
uncomfortable.

Guard against electric shock

Prevent body contact with earthed or grounded surfaces (e.g.
pipes, radiators, cookers and refrigerators). Electric safety can
be further improved by using a high-sensitivity (30 mA / 30 mS)
residual current device (RCD).

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense. Do not
operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it
frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust extraction
and collection facilities, ensure that these are connected and
properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed
from the tool before operating the tool.

Extension cables

Before use, inspect the extension cable and replace if
damaged. When using the tool outdoors, only use extension
cables intended for outdoor use. Up to 30 m of Black & Decker
extension cable can be used without loss of power.

Use appropriate tool

The intended use is described in this instruction manual.
Do not force small tools or attachments to do the job of a
heavy-duty tool. The tool will do the job better and safer at the
rate for which it was intended. Do not force the tool. Do not
use the tool for purposes not intended, for example, do not
use a circular saw to cut tree limbs or logs.

Warning!

 The use of any accessory or attachment or

performance of any operation with this tool other than those
recommended in this instruction manual may present a risk of
personal injury.

Check for damaged parts

Before use, carefully check the tool and mains cable for
damage. Check for misalignment and seizure of moving parts,
breakage of parts, damage to guards and switches and any
other conditions that may affect its operation. Ensure that the
tool will operate properly and perform its intended function.
Do not use the tool if any part is damaged or defective. Do not
use the tool if the switch does not turn it on and off. Have any
damaged or defective parts repaired or replaced by an
authorised repair agent. Never attempt any repairs yourself.

Unplug the tool

Unplug the tool when it is not in use, before changing any
parts of the tool, accessories or attachments and before
servicing.

Avoid unintentional starting

Do not carry the tool with a finger on the on/off switch. Be
sure that the tool is switched off when plugging in.

Do not abuse cord

Never carry the tool by its cord or pull it to disconnect from the
socket. Keep the cord away from heat, oil and sharp edges.

Store idle tools

When not in use, tools should be stored in a dry, locked up or
high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer
performance. Follow the instructions for maintenance and
changing accessories. Keep handles and switches dry, clean
and free from oil and grease.

Repairs

This tool complies with relevant safety requirements. Repairs
should only be carried out by qualified persons using original
spare parts; otherwise this may result in considerable danger
to the user.