Black & Decker KD1001K, Manual

4

ENGLISH

Intended use

Your Black & Decker rotary hammer drill has been designed
for drilling in wood, metal, plastics, and masonry as well as
for screwdriving and light chiselling applications. This tool is
intended for consumer use only.

General safety rules

Warning!

 Read all instructions. Failure to follow all instructions

listed below may result in electric shock, fire and/or serious
injury. The term “power tool” in all of the warnings listed
below refers to your mains operated (corded) power tool or
battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.

1. Work area
a. Keep work area clean and well lit. 

Cluttered and dark

areas invite accidents.

b. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases
or dust. 

Power tools create sparks which may ignite the

dust or fumes.

c. Keep children and bystanders away while

operating a power tool. 

Distractions can cause you to

lose control.

2. Electrical safety
a. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. 

Unmodified

plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and
refrigerators. 

There is an increased risk of electric shock

if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of
electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. 

Damaged or entangled cords increase the

risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. 

Use of a

cord suitable for outdoor use reduces the risk of electric
shock.

3. Personal safety
a. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication.

A moment of inattention while operating power tools may
result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in

the off position before plugging in. 

Carrying power

tools with your finger on the switch or plugging in power
tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. 

A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance

at all times. 

This enables better control of the power tool

in unexpected situations.

f.

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. 

Loose clothes, jewellery or long hair

can be caught in moving parts.

g. If devices are provided for the connection of dust

extraction and collection facilities, ensure these
are connected and properly used. 

Use of these

devices can reduce dust related hazards.

4. Power tool use and care
a. Do not force the power tool. Use the correct power

tool for your application. 

The correct power tool will do

the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not

turn it on and off. 

Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source before

making any adjustments, changing accessories, or
storing power tools. 

Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. 

Many accidents are caused by poorly

maintained power tools.

f.

Keep cutting tools sharp and clean. 

Properly maintained

cutting tools with sharp cutting edges are less likely to
bind and are easier to control.