How to Use
This appliance is intended for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of
the iron.
• Please go to www.prodprotect.com/applica to register your warranty.
Note:
Use ordinary tap water for ironing. do not use water processed through
a home softening system.
Important: For optimum performance, let the iron stand for 90 seconds
before beginning to iron.
FILLING WATER TANK
1. Tilt the iron and using a clean measuring cup, pour
water into water-fill opening
(A)
until the water
reaches the MAX mark on the water tank. Refill as
needed.
2. Plug in the iron.
Tip:
If unsure of a garment’s fiber, test a small area
(on an inside seam or hem) before ironing.
STEAM IRONING
The Smart Steam
®
system automatically generates the right amount of
steam for the fabric type selected. once you select the temperature, the
Smart Steam
®
technology detects the temperature and adjusts the steam
power accordingly.
1. Turn the fabric select dial to appropriate setting
(between 4 and 6) for your fabric
(B)
. See fabric guide
on heel rest and read garment’s label to help you
determine fabric type. Be sure there is water in the
reservoir. Steam is automatically turned off between
settings 0 and 3.
2. When finished ironing, turn the fabric select dial to 0 and unplug the iron.
Important: Always stand the iron on its heel rest when powered on and not
in use.
SPRAY
Use
to dampen tough wrinkles at any setting
(C)
.
1. Be sure the iron is filled with water.
2. on first use, pump the spray button several times.
Product may vary slightly from what is illustrated.
1. Spray nozzle
. Water-fill opening
. Fabric select dial
. Spray button
. 60° pivoting cord
6. Heel rest
7. Fabric guide
8. Water tank
9. Soleplate
ENGLISH
C
B
A
Fabric guide
1
Synthetic
Nylon • Silk
Polyester • Rayon
Cotton Blends
Wools
6
Cotton • Linen
