How to Use
This appliance is for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of
the iron.
• Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. do not use water processed
through a home softening system.
Important: For optimum performance, let the iron stand for 90 seconds
before beginning to iron.
FILLING WATER TANK
1. Tilt the iron and using a clean measuring cup, pour
water into water-fill opening (A) until the water
reaches the MAX mark on the water tank. Refill as
needed.
2. Plug in the iron.
Tip: If unsure of a garment’s fiber, test a small area (on
an inside seam or hem) before ironing.
Note: If you need to add water while ironing, unplug the iron and follow
above steps.
-WAY AUTOMATIC SHUTOFF
The automatic shutoff feature in your iron works as follows:
• once the iron reaches appropriate temperature, it
will turn off after 30 seconds of inactivity if left on its
soleplate or tipped over on its side. If left vertically on
its heel rest, it will shut off after 8 minutes (B).
• As soon as you pick up the iron, it will start heating
again. Wait for iron to reheat completely before
resuming operation.
SMART STEAM
®
TECHNOLOGY
The Smart Steam
®
system automatically produces steam when you turn the
fabric select dial between settings 4 and 6. The higher the setting, the more
powerful the steam.
SURGE OF STEAM
Horizontal
Tip: Use to remove stubborn creases.
1. With the water tank filled to the MAX mark, set fabric
select dial to appropriate setting (between 4 and 6) for
your fabric (C). See fabric guide under the heel rest
and read garment's label to help you determine fabric
type.
Product may vary slightly from what is illustrated.
1. Spray nozzle
. Water-fill opening
. Fabric select dial
. Spray button
. Steam button
6. 60° pivoting cord
7. Heel rest
8. Fabric guide
9. Water tank
10. Soleplate
A
C
ENGLISH
B
8 minutes
0 seconds
