7
USING THE DICING DISC
(ORANGE)
Important:
All parts related to dicing are color coded
ORANGE for ease of use .
1 . Lock the processing basin onto the base .
2 . Place the dicing shaft in the processing basin
over the center coupling . (E)
3 . Carefully pick up the dicing disc using the
finger holes in the top of the disc .
4 . Place dicing disc into the processing basin
and onto the dicing shaft with the grid facing
opposite the continuous flow chute (facing
right) . The dicing disc can only be properly
installed when the dicing grid faces opposite
the continuous flow chute . (F)
5 . Grasp the dicing blade by the center using the
finger grips . Do not touch the blade edge .
6 . Insert the curved plastic edge under the outer
edge of the dicing disc . (G)
7 . Pull the dicing blade lock into “open” position
in the center of the blade by using the metal
tab . (H)
8 . Place the center of the blade down onto the
orange top of the dicing shaft .
9 . Release blade lock tab once the center of the
dicing blade lies flat against the dicing disc .
10 . Place lid on processing basin and lock into
place by rotating counterclockwise .
Important:
Be sure to only handle blade with the
safe finger grips .
Important:
Always place the curved end of the
blade under the lip of the dicing disc FIRST then
place the center of the blade on the center shaft of the disc .
11 . After dicing, turn the appliance off, unplug, and then remove lid .
12 . Carefully pull the dicing blade lock into “open” position using the
metal tab . (H)
F
H
G
E
