Features
•
3000W
•
3-Heat settings
•
Fan heater
•
Cord storage
•
Wheels
How to use your Radiator
Caution:
This product is intended for heating rooms.
Do not use this appliance for any other purpose.
For indoor, domestic use only.
Assembly:
• Fit the wheels before using the appliance. Never use the appliance without the wheels fitted.
• Place the heater on the floor upside down. It is quite normal to hear the oil moving inside the radiator.
• Fit the bent end of the first wheel clamp (11) into the hole in the wheel support (10).
• Place the support between the last 2 heating fins (13).
• Swing the clamp around the radiator & insert the free end into the hole in the support (10).
• Fit the wing nut (12) onto the clamp & rotate it in a clockwise direction until tight.
• Repeat this procedure to fit the other wheels at the opposite end of the appliance.
• Put the heater into its normal upright position. Wait for at least three minutes before operating the appliance.
Radiator Operation:
• Fully unwind the cord & place the unit on the floor, away from any obstructions.
• As a safety mechanism, the oil radiator will not function if the unit is not on a level surface.
• Connect the heater to an electrical supply, leaving sufficient space around it for ventilation.
• Rotate the thermostat dial (2) to maximum and press the heating buttons (3), (4) as required.
• Low power is selected by pressing the low heat button (3) only.
• Medium power is selected by pressing the high heat button (4) only.
• High power is selected by pressing both buttons (3) & (4).
• A lamp on each button will light up to indicate the chosen heat setting.
• Once the room is at a comfortable temperature, the thermostat dial (2) should be slowly turned in the
opposite direction until the appliance just stops working.
• The temperature will be maintained at the present level by the thermostat inside the unit.
• When it is no longer necessary to heat the room, return the heating buttons (3 & 4) to the off (0) position to
turn the unit off and unplug it from the mains supply.
Note:
This appliance must be attended in use.
Warning:
In order to avoid overheating, do not cover this appliance.
-4-
10
11
12
