ENGLISH
ENGLISH
9
7
8
10
FAUCET FUNCTIONS
DRAIN BODY INSTALLATION
7 WATER SUPPLY CONNECTIONS
Gently separate hot and cold Supply Tubes (
7A
), approximately three inches apart.
Connect water Supply Lines (
7B
) to Faucet Inlets (
7C
). Hot water supply line goes to hot
inlet fitting indicated by red tag (
7D
). (
Supply lines not included
). Follow manufacturer’s
instructions when installing supply lines.
Do not twist Supply Tubes (
8A
)!
8 DRAIN INSTALLATION
Install and adjust Drain (
8A
) using separate instructions supplied with the Drain assembly.
For
T40-YP
models, grid strainers must be ordered separately! For sinks with an
overflow, order
T47-9GS
*. For sinks without an overflow, order
T47-7GL
*.
9 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
10 VALVE FUNCTION
By lifting the Lever Handle (
10A
) up, the valve will be activated allowing water to flow.
The water flow will increase by continuing to lift up the Lever Handle (
10A
). By rotating
the Lever Handle counter-clockwise, the water temperature will decrease to cold flow
only. By rotating the Lever Handle clockwise, the water temperature will increased to
hot flow only.
3
7A
7C
7D
7B
7A
7C
7B
10A
10A
8A
COLD
HOT
OPEN
HOT
COLD
Summary of Contents for Price Pfister KENZO 40 Series
Page 11: ...FRANÇAIS FRANÇAIS 11 ...
