12 • ENGLISH
finish and cause possible overload to the motor.
2. Sanding disc polishing compound or wax bonnet should
be selected in accordance with the material and the
desired surface finish. Maximum polishing compound
and/or wax. Apply a small quantity of compound
and/or wax on material surface and polish with the
wool bonnet.
MAINTENANCE
Warning! Before cleaning or performing any
maintenance, power supply shall be disconnected
from tool.
Note: All maintenance should only be carried out by
the manufacturer or authorized service organization.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the service
organization.
Carbon brushes
The brush and commutator of the tool shall be examined
for several months. Their good contact makes the tool
energetically. When the spark around the commutator
become greater the carbon brushes should be changed.
Cleaning
Warning! Before cleaning or performing any
maintenance, power supply shall be disconnected
from tool. Compressed dry air blow may be the most
effective cleaning method. Always wear safety goggles
when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept
clean. Do not attempt to clean by inserting pointed objects
through openings.
No chemical agent is allowed to be used in cleaning the
power tool.
ACCESSORIES
The performance of your tool depends on the accessory
used. Black & Decker accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
Nota: Correct recomended accesories are 5”, try to ask
your retailer for Black & Decker original supply bonnets.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com
SPECIFICATIONS
WP600K
Voltage
AR, B2C
220V~50Hz
B2
220V~60Hz
B3
120V~60Hz
BR
127V~60Hz
Power
600W
No-load speed
1000 - 3000/min (rpm)
Bonnet/Grinder diameter
127mm (5”)
Spindle screw thread
5/8”-11/M14
Weight
2,1 kg
