ENGLISH
5
Use
Warning!
The appliance may be hot
during use and during the cool-down
period.
Switching on and off (fig. B)
The speed control switch (4) has three
positions: off, slow and fast.
Move the switch to position
0
to
switch the appliance off.
Turn the switch to position
1
for
blowing air at a slow speed.
Turn the switch to position
2
for
blowing air at a high speed.
Heat control (fig. B)
The heat control switch (3) has three
positions: warm, hot and very hot.
Move the switch to position
1
for
normal warm air.
Move the switch to position
2
for hot
air.
Move the switch to position
3
for very
hot air.
Cool shot button (fig. B)
Press and hold the cool shot button
(1) to set your individual style.
Diffuser and concentrator nozzles
Fit the concentrator nozzle (6) for
general hair drying and styling.
To add volume and lift, fit the diffuser
nozzle (7).
Ion indicator
The ion indicator (2) will be
permanently lit during use.
The hair dryer will emit ions which
will be carried onto the hair by the
flow of air.
Note:
Smaller water particles dry faster,
therefore reducing the time the hair is
subjected to heat which can damage hair
over time.
Mains plug replacement (U.K. &
Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live
terminal in the new plug.
Connect the blue lead to the neutral
terminal.
Warning!
No connection is to be made to
the earth terminal. Follow the fitting
instructions supplied with good quality
plugs. Recommended fuse: 13 A.
Cleaning and maintenance
Warning!
Switch the appliance off and
unplug it before cleaning or maintenance.
Remove any loose hair which may
have become trapped in the diffuser
or the rear filter.
Open the rear cover (8) and remove
hair.
Do not try to disassemble or repair
the hair dryer yourself.
Switch off the appliance before
cleaning, changing accessories or
touching any parts which move in
use.
Always clean the appliance
immediately after use.
clean the appliance with a damp
cloth.
Warning!
Do not immerse the appliance,
the cord set or the plug in water or any
other liquid.
Warning!
Do not wash any parts in a
dishwasher.
Protecting the environment
Separate collection. This
product must not be disposed
of with normal household
waste.
Should you find one day that your
appliance needs replacement, or if it is of
no further use to you, think of the
protection of the environment. Black &
Decker repair agents will accept old Black
& Decker tools and ensure that they are
disposed of in an environmentally safe
way.
Separate collection of used
products and packaging
allows materials to be
recycled and used again. Re-
use of recycled materials
helps prevent environmental
Summary of Contents for SC900
Page 1: ...English 3 Italiano 7 Español 12 Português 17 Ελληνικά 22 ...
Page 2: ...2 ...
Page 27: ...ΕΛΛΗΝΙΚΑ 27 ...
