7
ENGLISH
2. Fully assemble the chopper.
3. Connect it to the electricity supply.
4. Turn the on/off knob (12) to the on ‘I’
position to start the appliance.
5. Remove the pusher(1).
6. Feed the ingredients down the feeding
tube (2).
7. The pusher (1) can be used to guide
smaller ingredients onto the blade.
8. When finished, turn the on/off knob (12)
to the off ‘0’ position to stop the
appliance.
The appliance should be
disconnected from the mains
supply before removing the blade
holder.
The appliance will not operate
without the bowl lid fitted.
Do not operate the appliance
without the blade fitted.
The chopper should not be run for longer
than 2 minutes. After a continuous run of 2
minutes, the chopper should be allowed to
cool for at least 5 minutes before further
use.
Useful advice
• Place the appliance on a clean, flat work
surface.
• When chopping is complete disconnect
the appliance from the power socket.
Maintenance & cleaning
• Switch the appliance off, remove the plug
from the power socket and wait until the
blade has stopped rotating.
• The appliance is easier to clean if you do
so immediately after use.
• Do not use abrasive cleaning agents,
scourers, acetone, alcohol etc. to clean
the appliance.
• All removable parts can be cleaned in a
dishwasher.
• All removable parts can be cleaned with a
cleaning brush in warm water with some
washing-up liquid and rinse them under
the tap.
• Remove the dirty parts from the motor
unit.
• Clean the motor unit with a damp cloth.
Warning!
Never immerse the motor unit in
water nor rinse it under the tap.
SM250
Voltage
220 – 240 Volts
Supply
50/60 Hz
Power consumption
200 W
Net Weight
1.4 Kg
Technical data
Summary of Contents for SM250
Page 1: ...www blackanddecker ae SM250 AR PT FR EN ...
Page 31: ......
