-4-
How to use your Vacuum Cleaner
• This Vacuum Cleaner is intended for household use only.
•
Do not use this appliance outdoors.
ASSEMBLY:
Connecting the hose
• Insert the hose connector (6) into the inlet of the appliance
• Push the hose until the release button clicks into place.
• To disconnect the hose, press the release button and pull out the hose.
Connecting the telescopic tube
• Push the hose handle (1) into the telescopic tube (9).
• To remove the tube, pull the hose out of the tube.
Fitting the floor head
• The floor head (12) can be used for vacuuming on carpet and hard surfaces (e.g.
laminate and tiles).
• Push the tube (9) into the head (12).
• To remove the head, pull it from the tube.
Fitting accessories
The crevice tool (19) is designed to help vacuum in narrow and hard-to reach
places. The brush tool (18) can be used to vacuum furniture, blinds, curtains,
windows and stairs. The accessories can be mounted on both the hose handle (1)
and the tube (9). When not in use, the accessories should be placed in the tool
storage compartment (14). Open the tool storage compartment (14) by pressing the
latch (15). The door will automatically spring open. Remove the required accessory
& close the door. Push the accessory onto the hose handle (1) or the tube (9) as
required. To remove an accessory, pull the accessory from the hose handle or the
tube.
USE:
Unwinding and rewinding the power cord
The cord rewind button (4) can be operated by hand or foot. Pull a sufficient length
of cord from the back of the appliance & connect it to a suitable power supply. After
use, unplug the cord and press the cord rewind (4) button to retract the cord into
the unit. Manually guide the cord to ensure it does not swing back. Ensure the plug
is correctly located.
