7
ENGLISH
Electrical safety
This appliance is double insulated;
therefore no earth wire is required.
Always check that the power supply
corresponds to the voltage on the rating plate.
Power plugs must match the outlet. Never
modify the plug in any way. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
•
If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised Black & Decker Service Centre in
order to avoid a hazard.
Features
This Appliance includes some or all of the
following features.
1. Dust bowl
2. Telescopic extension tube
3. Handle adapter
4. Hose
5. On/off switch
6. Handle
7. Accessory mounts
8. Cord rewind
9. Floor head
Assembly
Connecting the hose (fig. A)
•
Insert the hose connector (10) into the inlet
(11) of the appliance.
•
Press firmly until it clicks into place.
Disconnecting the hose (fig. A)
•
Press and hold the hose release buttons (12).
•
Pull the hose connector (10) out of the inlet
(11) of the appliance.
Fitting the telescopic extension
tube (fig. B)
•
Firmly push handle adaptor (3) in to the
telescopic extension tube (2).
Adjusting the telescopic
extension tube (fig. C)
•
Press down and hold the adjustment button
(13) on the telescopic extention tube (2).
•
Raise or lower the telescopic extention tube
to the required height.
Fitting accessories (fig. D & E)
•
The crevice tool (14) allows for vacuuming in
narrow and hard-to-reach places.
•
The upholstery tool (15) allows for
vacuuming on furniture, blinds, curtains,
windows and stairs.
•
The floor head (9) is used for dry vacuuming.
•
The accessories can be fit on both the
handle adaptor (3) and the telescopic
extension tube (2).
•
Firmly push the accessory onto the handle
adaptor (3) or telescopic extension tube (2)
as required.
•
To remove an accessory, pull the accessory
from the handle adaptor or the extension
tube.
