11
Compact CAT5 Audio/Video Receiver
11
CAUTION
Before plugging in your remote monitor, verify that the AC line is properly
wired and that a protective ground (green) wire is established with NO
potential difference between both the sender and Receiver locations (The
UTP Splitter can tolerate up to 5 v peak-to-peak ground noise between the
two locations) . Failure to ensure good grounding can result in erratic
operation and possible shock hazards with severe damage to your
equipment.
NOTICE
Do not connect this unit to any LAN device such as network cards or hubs
as this may damage the AC155A-R3 and/or the LAN device. Use EIA/TIA
568B standard straight-through patch wiring as shown below. Do not use
crossover cables.
EIA/TIA 568B WIRING STANDARD
PIN Wire
Color
1
White w/ Orange Stripe
2 Orange
3
White w/Green Stripe
4 Blue
5
White w/Blue Stripe
6 Green
7
White w/Brown Stripe
8 Brown
