Appendices
877-877-2269 | blackbox.com
Page 51
Mouse Latency Allowance
This option is used during calibration to account for latency delays that may be caused as signals pass through a device.
During calibration, the Wizard DXS - Digital waits for 40ms after each mouse movement before sampling the next. If a device
adds a significant delay to the flow of data, the calibration process can be lengthened or may fail entirely. The value entered here
is added to (or subtracted from) the default 40ms sampling time.
Note: You can enter negative values (down to -40) in order to speed up the calibration process when using fast KVM switches.
Use this option with caution as it can adversely affect the calibration process.
Mouse Rate
Defines the rate at which mouse movement data are transmitted to the system. The default option is 20ms, which equates to 50
mouse events per second. This is used to slow down the rate in exceptional circumstances but normally requires no adjustment.
Single Mouse Mode Mouse Switch
Select the mouse button combination to exit from single mouse mode (when active).
Use Quick Mouse Calibration
Invokes optimized calibration techniques that handle the majority of mouse types.
Behaviour for admin connections when limit reached
Determines what should occur when four global connections already exist and a fifth, administrator connection attempt is
made. Options are:
Replace oldest connection
,
Replace newest connection
and
Don’t replace
. Only non-administrator
connections can be terminated in this way.
Use VESA GTF
When ticked, the VESA Generalized Timing Formula will be used to help determine the correct input video resolution and timing
details.
Upgrade firmware
Places the unit into upgrade mode. See
Upgrading Wizard DXS - Digital
.
Reset Unit
Performs a complete cold boot of the Wizard DXS - Digital unit.
