DVI-D CATX/FIBER KVM-EXTENDER
28
DDC
You can select, whether the DDC is taken from internal DDC table or from local monitor or
the DDC information could be downloaded from remote monitor and stored into internal
table.
DDC JP1
JP2
From internal Table
From local Monitor
Loading the DDC Information from the
Remote Monitor into the internal DDC
Table (see also below: Loading the DDC
Information from the Remote Monitor into
the internal DDC Table) (default)
Loading the DDC Information from the Remote Monitor(s) into
the internal DDC Table
To load the DDC Information from the Remote Monitor(s) into the internal DDC Table,
please precede the following steps:
•
Power up the CPU, the Local Unit, the Remote (cables to the CPU connected) and the
Monitor
•
Pull the Monitor Cable(s) from the Remote Unit (Quad-Head devices: All Monitors!)
•
Switch ON the Monitor(s) (if switched OFF), ALL Monitors!
•
Plug the Video-Cable of the Remote Monitor(s) into the remote unit (Remote and Local
Unit powered! - ALL Monitors!)
•
The DDC Information of the Remote Monitor(s) is read automatically, transferred to the
Local Units and stored into the DDC-EPROM
•
After a successful programming of the DDC EPROM, the ‚Video-OK’ LED at the
Local Unit is blinking rapidly for approx. 1 second
•
Done
Summary of Contents for ACS4422A-R2
Page 4: ...DVI D CATX FIBER KVM EXTENDER 4 ...
Page 49: ...NOTES ...
