DVI-D CATX/FIBER KVM-EXTENDER
30
4.2 Setup at the Remote Unit
After unscrewing and opening the upper shell, please place the device in this orientation: with
the CATx/Fiber connectors to the right and the electrical connectors to the left.
The main PCBs then will look like this:
Use the diagram to locate jumpers.
Selecting the moment of switching to the next frame
The transmission of screen data is not synchronous to the screen change of the graphic card.
Normally, the transmission is terminated during displaying a frame on the screen. If the
device switches to the new frame during the displaying period of the old frame (somewhere
on the screen), it’s possible, that you can see horizontal screen breaks in the moment of
switching. On the other hand the device must idle, until the actual frame is displayed
completely (until VSYNC) -> the number of frames per second transmitted sinks.
Moment to switch
JP3
behaviour
Switching during HSYNC
(default)
Higher Framerate but (possibly) horizontal breaks
detectable
Switching during VSYNC
Lower Framerate no horizontal breaks detectable but
(possibly) stepping pictures
JP1, JP2, JP3
Summary of Contents for ACS4422A-R2
Page 4: ...DVI D CATX FIBER KVM EXTENDER 4 ...
Page 49: ...NOTES ...
