Black Box FAS 200 / MFA, User Manual

Installation

Press the power cable and video cable into the grove between the

windshield and the upholstery of the vehicle. You may use the mounts to 

arrange the cable if needed.

6

This product have an ability that can rotate 360 degrees. Thus, if you want to 

use for indoor image black box, rotate unit to the opposite side of front. When 

rotate the unit, please check cable connectivity carefully.

Installation (Passenger Car, SUV, Larger SUV)

After proper vehicle type is selected and the camera is adjusted, you should drive the car on a road now and find a 

road section with proper lane markings as soon as possible.

The system will not start correct operation, before 

You have passed at least 1 x such a road section for at least 30 seconds

with a speed slightly higher than the 

adjusted minimum speed warning level. Later, the image recognition software inside the camera will automatically 
repeat the adjustments regularly and is even able to adjust the system temporarily to different lane marking 
systems used in construction areas.

After the system has made all internal adjustments and calibrations, 

You will hear an announcement, that the warning system is now working properly.

Important note: Never

press the 

automobile type selection button

during driving-

because pressing this knob 

automatically will erase the old camera calibration and starts a new calibration procedure. If this should happen 
accidentally, You can restore the old setting by 

waiting the 2 beeps

, which start the tilt adjustment time and 

press 

1 x the same knob

again. This will restore the previous calibration again and the system will work again after 

short time.

7