PHONE LINE MANAGER 16 X 4
59
19.7 Outside Line Guard Time
Once an outside call is complete (that is, one of the parties hangs up), that particular outside line is inactive
for a defined period of time. This gives the Central Office an on hook condition for this amount of time.
6. Enter the “outside line guard time” code:
0
0.75 seconds
1
1.5 seconds
* 2
2.25 seconds
3
3 seconds
4
3.75 seconds
5
4.5 seconds
6
5.25 seconds
7
6 seconds
8
6.75 seconds
9
7.5 seconds
19.8 Pulse-Dialing Timing
These settings relate to pulse-mode dialing only. Break time is the time for generating a single pulse; it is the
amount of time the line goes on-hook to send a dial pulse. Make time is the off-hook time between dial
pulses.
7. Enter the “pulse dialing break time” code:
0
48 milliseconds
1
56 milliseconds
* 2
64 milliseconds
3
72 milliseconds
4
80 milliseconds
5
88 milliseconds
6
96 milliseconds
7
104 milliseconds
8
112 milliseconds
9
120 milliseconds
