9
CHAPTER 3: Installation
3. Installation
3.1 Driver Installation
Follow the steps below to install the USB
↔
USB Data
Transfer for the first time:
1. Power on both computers where you will connect
the USB
↔
USB Data Transfer. Make sure that the
USB port on each PC is enabled and working
properly.
2. Plug the USB cable into the USB port. Windows
will detect an unknown device and run the
Add
New Hardware Wizard
to help you set up the new
device.
3. Insert the USB cable driver disk into the CD-ROM
drive and click
Next
to continue.
4. If you’re using Windows 98, follow the steps below.
a. Select
Search for the best driver for your device
and click
Next
.
b. Select
Specify a Location
and click
Browse
.
Change the folder of your CD-ROM drive (for
example,
A:\WIN98
) and click
OK
.