1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746
© Copyright 2006. Black Box Corporation. All rights reserved.
4. Ports 7 and 8, 15 and 16, or 23 and 24 can use two types of media: UTP or SFP fiber with autodetect.
5. Connect a user console (an async PC) to the switch’s RS-232 port to preconfigure the switch for network
management. For example, set the switch’s IP address, VLAN, port trunking, and STP.
The switch’s serial port default settings are listed below.
Baud rate: 57600
Stop bits: 1
Data bits: 8
Parity: N
Flow control: None
The switch’s default values are as follows:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
Username: admin
Password: admin
NOTE
You can use Telnet™ or the Web to preconfigure the switch with the default IP address
and username/password in the first configuration. Refer to the user’s manual on the
included CD-ROM for details on setting the parameters. The user’s manual is filed
under the path: \manual of the CD-ROM.
BLACK BOX and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Telnet is a trademark of Telnet Communications, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
