7
SDSL NETWORK EXTENDER SUBSCRIBER
Other Information
P
ORT
P
INOUTS
Ethernet Pinout
SDSL Pinout
Pin 1
RX+
Pin 1
Pin 2
RX-
Pin 2
Pin 3
TX+
Pin 3
Pin 4
Pin 4
Ring
Pin 5
Pin 5
Tip
Pin 6
TX-
Pin 6
Pin 7
Pin 7
Pin 8
Pin 8
LED Indicators
The DSL/Ethernet ports feature the following status LEDs for at-a-glance
monitoring.
•
Available SDSL Connection LED:
Pulsing green (once per second) indicates
that the DSL connection is operational and that the Network Extender is
receiving either valid data packets or status packets from the remote unit on
the other side of the DSL connection.
•
Power:
Steady green indicates normal operation.
•
Collision:
Flashing red indicates collision on the Ethernet segment.
•
Rx:
Flashing amber indicates data receive from the Ethernet segment. Steady
amber indicates that the DSL connection is not present.
•
Tx:
Flashing amber indicates data transmit to the Ethernet segment. Steady
amber indicates that the DSL connection is not present.
•
Lnk:
Steady green indicates that the Ethernet link has been established. Steady
green (if accompanied by corresponding steady amber TX and RX LEDs)
indicates that the DSL connection is not present.
